SSIP-01 - Swimming Pool Vevor - Free user manual and instructions
Find the device manual for free SSIP-01 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sand Filter Pump for Swimming Pools |
| Brand | Vevor |
| Model | SSIP-01 |
| Intended Use | Above-ground swimming pools |
| Filter Type | Silica Sand Filter |
| Pump Motor Power | 1.0 HP (750 W) |
| Max Flow Rate | 3,000 GPH (11,355 L/h) |
| Max Pressure | 15 psi (1.03 bar) |
| Valve Type | 6-in-1 Multi-port Valve |
| Filtration Media | No. 20 silica sand (not included) or alternative media |
| Tank Material | Polypropylene |
| Dimensions (L x W x H) | Approx. 24" x 14" x 16" |
| Weight | Approx. 35 lbs (16 kg) |
| Power Supply | AC 110-120V / 60Hz or 220-240V / 50Hz |
| Hose Connection | 1.5" (38 mm) or 1.25" (32 mm) union connections |
| Main Functions | Filtering, backwashing, rinsing, recirculating, draining, and winterization |
| Control Positions | Filter, Backwash, Rinse, Recirculate, Waste, Closed |
| Maintenance Tasks | Regular backwashing, periodic sand replacement every 3-5 years |
| Cleaning Frequency | Check pressure gauge weekly; backwash when pressure rises 8-10 psi above normal |
| Safety Features | Thermal overload protection, GFCI-compliant plug for electric safety |
| Operating Temperature | 35°F to 104°F (1.6°C to 40°C) for water |
| Included Parts | Sand filter tank, pump, multi-port valve, base, hoses, clamps, manual |
| Spare Parts Availability | Vevor offers replacement filters, valves, and O-rings |
| Repairability | Modular design allows easy access to pump and valve; user-serviceable with standard tools |
| Manual Languages | English, French, German, Spanish, Italian, Portuguese, Dutch, Polish, Swedish, and more |
Frequently Asked Questions - SSIP-01 Vevor
How often should I backwash my Vevor SSIP-01 sand filter?
Backwash your sand filter when the pressure gauge reads 8-10 psi (0.55-0.69 bar) above the normal operating pressure. This typically occurs every 1-2 weeks during peak pool season, depending on usage and debris load.
What type of sand should I use in the SSIP-01?
Use No. 20 silica sand specifically graded for pool filters. The tank requires approximately 50-60 lbs (23-27 kg) of sand, but always check the manual for the exact amount. Do not use play sand or other grades, as they may damage the system.
Why is the pump not priming?
Check that the pump basket is properly sealed and filled with water. Ensure the suction line is not clogged and all valves are open. For initial setup, remove the top strainer cover, fill the pump with water, and then start the pump with the closed (or winterize) position briefly to help prime.
How do I switch between filter and backwash modes?
Remove the pump from the electrical supply, then turn the multi-port valve handle to the desired position (e.g., Filter or Backwash). Always depress the valve handle while turning to prevent damage. After switching, restart the pump and check for leaks.
Can I use this sand filter for a saltwater pool?
Yes, the SSIP-01 is compatible with saltwater pools. The filter tank and pump are made of corrosion-resistant materials. However, periodically inspect the O-rings and gaskets for wear, as salt exposure can accelerate degradation.
What maintenance is required before winter?
Before winter, perform a backwash and rinse cycle, drain all water from the pump and hoses, and store the system indoors if possible. Protect the filter tank from freezing by removing sand or ensuring it is completely dry. Consult the manual for full winterization steps.
How do I clean the pump basket?
Turn off the pump, unscrew the pump basket lid, remove the basket, and rinse it with a hose. Clear any debris that may be in the suction line. Reinsert the basket, secure the lid, and restart the pump. Do this whenever the pump flow seems low.
What does the pressure gauge indicate?
The pressure gauge measures the internal pressure of the filter tank during operation. A higher reading indicates the filter is getting clogged. When the pressure rises 8-10 psi above the initial clean pressure, it's time to backwash.
Can I run the pump while people are in the pool?
Yes, the SSIP-01 is designed for continuous operation, and it is safe to run the pump while swimmers are in the pool. However, ensure the pool circulation is adequate and follow local safety codes for pool equipment.
Where can I find replacement parts for the SSIP-01?
Replacement parts such as O-rings, valve gaskets, pump lids, and hoses are available from Vevor's official store or authorized dealers. Check the model number and refer to the parts list in the manual for exact specifications.
User questions about SSIP-01 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Swimming Pool in PDF format for free! Find your manual SSIP-01 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SSIP-01 by Vevor.
USER MANUAL SSIP-01 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : SSIP-01
Category : Swimming Pool