Frequently Asked Questions - FRB-640 Vevor
How to calibrate the filling volume?
Use the digital control panel to set the desired volume. Carry out a test with water and adjust the value until you obtain the desired filling accuracy (±1%).
What is the difference between a vacuum filling machine and a conventional filling machine?
The vacuum filling machine uses a vacuum pump to create suction that guides the liquid into containers, reducing oxidation and waste. It is ideal for viscous products and sensitive liquids.
How to clean the machine after use?
Unplug the device, disassemble the filling nozzles and tubes, then rinse them with clean water. Clean the body with a damp cloth. Avoid abrasive products.
What to do if the vacuum pump does not start?
Check the power supply and the fuse. Make sure the tank is properly closed. If the problem persists, contact after-sales service.
What type of product can be filled with this machine?
The machine is suitable for food liquids (juices, sauces, oils) and cosmetic products or non-aggressive chemicals. Avoid flammable liquids.
How to adjust the nozzle height?
Loosen the rack fixing, adjust the height according to the size of the container, then tighten firmly.
What safety precautions should be taken?
Wear protective gloves and safety glasses. Do not operate the machine without liquid. Always use the emergency stop in case of anomaly.
How to maintain the vacuum pump?
Regularly check the oil level of the pump and change it every 500 hours of use. Clean the inlet filter.
Can I use the machine for food liquids?
Yes, the parts in contact are made of stainless steel and can be sterilized. Follow the applicable hygiene rules.
How to order spare parts?
Contact Vevor customer service with the model number FRB-640. Indicate the desired part (nozzles, seals, pump) and the serial reference.
USER MANUAL FRB-640 Vevor