YC25004 - Stabilizer jacks Vevor - Free user manual and instructions
Find the device manual for free YC25004 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Stabilizer jack for caravan and trailer |
| Brand | Vevor |
| Model | YC25004 |
| Total load capacity | 2,000 kg |
| Capacity per jack | 500 kg |
| Number of pieces | 4 jacks included |
| Main material | High-strength steel |
| Minimum height | 230 mm |
| Maximum height | 450 mm |
| Unit weight | Approximately 3.2 kg |
| Adjustment type | Worm screw with crank |
| Base | Articulated widened non-slip plate |
| Mounting | By bolts to the chassis (not included) |
| Main use | Stabilization during parking |
| Protection | Anti-rust treatment by cataphoresis |
| Maintenance | Regular cleaning and lubrication of threads |
| Safety | Do not lift the vehicle, only stabilize |
| Warranty | 2 years |
| Package contents | 4 jacks, 4 cranks, bolt kit, manual |
Frequently Asked Questions - YC25004 Vevor
How to install this stabilizer jack on my caravan?
Attach the support plate to the chassis using the supplied bolts. Position the jack vertically and make sure the base rests firmly on the ground before locking it. Do not use it to lift the vehicle.
What is the maximum load supported?
Each jack supports 500 kg statically, i.e. 2,000 kg for a set of 4. This covers most caravans and light trailers.
Can I use this jack to lift a vehicle?
No, this product is a stabilizer, not a lifting jack. It should only be used to stabilize a stationary vehicle, never to change a wheel or perform work under the vehicle.
How to maintain the jacks to prevent rust?
Clean the metal parts after use with a dry cloth, apply a light oil to the threads and store them in a dry place. The cataphoresis already protects against corrosion, but regular maintenance extends the service life.
Are the cranks included?
Yes, the pack contains 4 cranks, one for each jack. They store easily and fit onto the adjustment screw.
What chassis height is suitable?
This model is designed for chassis located between 230 mm and 450 mm from the ground. Check your vehicle's ground clearance before purchasing.
Can they be used on uneven ground?
The non-slip base offers good stability, but for optimal comfort, place a load distribution plate under the jack if the ground is soft or very uneven.
What tool is needed for assembly?
Assembly simply requires a 13 mm wrench and a drill if you need to drill holes in the chassis. Bolts and nuts are supplied.
Does the base pivot to adapt to the terrain?
Yes, the base is articulated and follows ground slopes up to about 15 degrees, improving stability on uneven surfaces.
What to do if a part is missing or defective?
Contact Vevor customer service upon receipt. Include your order number and a photo of the problem. The 2-year warranty covers manufacturing defects.
User questions about YC25004 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Stabilizer jacks in PDF format for free! Find your manual YC25004 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YC25004 by Vevor.
USER MANUAL YC25004 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : YC25004
Category : Stabilizer jacks