SS286 - Detector Vevor - Free user manual and instructions
Find the device manual for free SS286 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Metal and cable detector |
| Brand | Vevor |
| Model | SS286 |
| Primary use | Locating metals, electrical cables, and pipes in walls |
| Detection technology | Inductive sensor with digital processing |
| Maximum detection depth | 60 mm for metal |
| Adjustable sensitivity | Yes, continuous adjustment |
| Display | LCD with backlight |
| Power supply | Alkaline 9V battery |
| Approximate battery life | 20 hours |
| Sound indicator | Built-in buzzer |
| Visual indicator | LED and icons on the screen |
| Housing material | Reinforced ABS plastic |
| Dimensions | 230 x 130 x 50 mm |
| Weight | 350 g (without battery) |
| Automatic shut-off | After 5 minutes of inactivity |
| Operating temperature | 0 °C to 40 °C |
| Maintenance and cleaning | Clean with a soft, dry cloth, without solvents |
| Safety of use | Do not use in the presence of high-voltage cables without protection |
| Spare parts | Batteries, covers, and wall mount available |
| Repairability | Modular design facilitating component replacement |
| Warranty | 12 months against any manufacturing defect |
Frequently Asked Questions - SS286 Vevor
How does the SS286 detector work?
The detector emits an electromagnetic field and measures variations caused by the presence of metal or cables. The results are displayed on the LCD screen with audible and visual signals.
Which batteries should I use and how do I install them?
Use an alkaline 9V battery. Open the battery compartment at the back, insert the battery respecting polarity, then close the cover.
How do I adjust the device's sensitivity?
Use the adjustment dial to set the sensitivity. Start at a low level and increase until you get a stable signal without false alerts.
Why does my detector beep continuously?
This may be due to excessively high sensitivity, electromagnetic interference, or soil containing minerals. Reduce the sensitivity and move away from interference sources.
Can it detect live cables?
Yes, the detector is designed to locate live electrical cables, but it does not measure voltage. Always cut off the power before any work.
How do I interpret the audible and visual signals?
A continuous audible signal and a lit LED indicate a nearby target. The screen also displays a proportional signal strength bar.
What safety precautions should be followed?
Do not use the device near high-voltage cables without insulation. Avoid explosive environments and never open the housing.
How do I clean and maintain the detector?
Clean the outside with a soft, dry cloth. Do not use chemical or abrasive products. Store it in a dry, temperate place.
What should I do if the device does not turn on?
Check the battery, replace it if necessary. Make sure the contacts are clean. If the problem persists, contact customer service.
Is the detector guaranteed and repairable?
Yes, the warranty is 12 months. Thanks to its modular design, spare parts are available and the device is repairable.
User questions about SS286 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual SS286 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SS286 by Vevor.
USER MANUAL SS286 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : SS286
Category : Detector