SS283 - Detector Vevor - Free user manual and instructions
Find the device manual for free SS283 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cable and pipe locator |
| Brand | Vevor |
| Model | SS283 |
| Use | Locating power cables, water pipes and metal pipes in walls and floors |
| Dimensions (receiver) | approx. 28 × 12 × 7 cm |
| Dimensions (transmitter) | approx. 15 × 8 × 4 cm |
| Total weight | approx. 500 g |
| Power supply (receiver) | 6 × 1.5 V AA batteries |
| Power supply (transmitter) | 4 × 1.5 V AA batteries |
| Display | LCD with backlight |
| Operating frequency | 33 kHz / 125 kHz |
| Depth range | up to 2.5 m |
| Search modes | Power cable, water pipe, metal pipe, non-metal |
| Sensitivity | Adjustable |
| Signal tone | Yes |
| Vibration alarm | Yes |
| Automatic shutdown | After approx. 15 minutes |
| Calibration | Automatic |
| Cleaning | Wipe with a soft dry cloth |
| Package contents | Transmitter, receiver, carrying bag, 2 antennas, instruction manual |
Frequently Asked Questions - SS283 Vevor
How do I turn on the Vevor SS283?
Press and hold the ON/OFF button on the receiver until the LCD display lights up. Then select the desired search mode.
What batteries are required?
The receiver requires 6 AA batteries, the transmitter 4 AA batteries. It is best to use alkaline batteries for a long service life.
How can I adjust the sensitivity?
The sensitivity can be adjusted using the + / - buttons on the device. Increase the sensitivity for deeper lines, decrease it in the presence of interference.
What should be noted during operation?
Keep the sensor perpendicular to the wall or floor. Move the device slowly and evenly over the surface. Repeat the measurement from two directions.
How do I know if a power cable has been found?
As soon as the device locates a cable, a signal tone sounds and the LED lights up. The display shows the relative strength.
Can the device detect live cables?
Yes, in Power cable mode, live cables can be detected, but never use it to check active line voltages!
How do I maintain the device?
Clean the housing with a soft, damp cloth. Avoid aggressive cleaning agents and never immerse the device in water.
Why does the device show incorrect values?
Check the battery level and recalibrate the device if necessary. Keep it away from metal objects such as belt buckles to avoid measurement errors.
What is the maximum depth range?
The depth range is up to 2.5 meters depending on the ground conditions and type of line.
Is there a warranty?
Vevor usually offers a 12-month warranty on this model. Please keep your proof of purchase.
User questions about SS283 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual SS283 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SS283 by Vevor.
USER MANUAL SS283 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : SS283
Category : Detector