HPP1100 - Water pump Vevor - Free user manual and instructions
Find the device manual for free HPP1100 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | High pressure water pump |
| Brand | Vevor |
| Model | HPP1100 |
| Power | 1100 W |
| Supply voltage | 220-240 V / 50 Hz |
| Maximum pressure | 100 bar (1450 PSI) |
| Maximum flow rate | 5.5 L/min |
| Water temperature | 0-50 °C |
| Maximum suction height | 2 m |
| Dimensions (L x D x H) | 26 x 20 x 16 cm |
| Net weight | 6 kg |
| Housing material | Aluminum and stainless steel |
| Main functions | High pressure cleaning, water transfer |
| Maintenance and cleaning | Rinse with clean water after use, check the filter |
| Safety | Built-in thermal protection, safety switch |
| Spare parts and repairability | Seals and valves available |
| General information | Domestic and light professional use |
Frequently Asked Questions - HPP1100 Vevor
How to prime the HPP1100 pump?
Before first use, fill the pump chamber with water through the outlet port to create a prime. Never run the pump dry.
What pressure can the HPP1100 pump reach?
It can generate up to 100 bar (1450 PSI), suitable for cleaning hard surfaces.
Why is my pump losing pressure?
Check the tightness of the connections, the condition of the seals, and the cleanliness of the suction filter. Worn parts can cause a drop in pressure.
Can I use the pump with hot water?
The water temperature must not exceed 50 °C to avoid damaging the seals and internal components.
What type of oil is needed for the pump?
Use a special pump oil of type SAE 30 to lubricate the pistons and ensure proper operation.
How to maintain the HPP1100 pump?
After each use, drain the stagnant water, clean the filter, and check the connections. Regularly replace worn seals.
The pump does not start, what to do?
Check the power supply, the cable, the capacitor, and the motor. Refer to the electrical diagram in the manual.
What is the maximum suction height?
Approximately 2 m of positive height. Place the pump as close as possible to the water source to optimize suction.
Is this pump suitable for continuous use?
The pump is designed for intermittent use. Respect maximum work cycles of 30 minutes with pauses to avoid overheating.
What are the common wear parts?
The piston seals, discharge valves, and gaskets are the common wear parts. Inspect them and replace them if necessary.
User questions about HPP1100 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual HPP1100 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HPP1100 by Vevor.
USER MANUAL HPP1100 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : HPP1100
Category : Water pump