LSDP1-060-070-42 - Water pump Vevor - Free user manual and instructions
Find the device manual for free LSDP1-060-070-42 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | Vevor |
| Model | LSDP1-060-070-42 |
| Pump Type | Submersible Utility Pump |
| Power Rating | 60 W |
| Flow Rate | 70 L/min |
| Maximum Head | 42 m |
| Voltage | 220-240 V ~ 50 Hz |
| Inlet/Outlet Diameter | 1 inch (25 mm) |
| Maximum Liquid Temperature | 35 °C |
| Housing Material | Stainless Steel / ABS Plastic |
| Impeller Type | Centrifugal |
| Protection Rating | IP68 |
| Noise Level | ≤ 40 dB |
| Dimensions (L × W × H) | 220 × 180 × 200 mm |
| Weight | 5.2 kg |
| Function | Drainage, irrigation, water transfer |
| Control Method | Manual on/off switch |
| Cleaning | Rinse impeller and housing with clean water after use |
| Safety | Lower voltage cut-off, thermal overload protection |
| Spare Parts Availability | Replacement impeller and seals available |
Frequently Asked Questions - LSDP1-060-070-42 Vevor
How do I install the Vevor LSDP1-060-070-42 water pump?
Connect the outlet hose to the pump outlet, place the pump in water, and plug it into a grounded socket. Make sure the pump is fully submerged and the intake is not blocked.
What is the maximum flow rate of this pump?
The maximum flow rate is 70 L/min, which makes it ideal for draining pools, basements, or irrigation tasks.
Can this pump handle dirty water?
No, this pump is designed for clean water only. Debris or sand can damage the impeller and reduce performance.
How should I clean the water pump after use?
Disconnect the power supply, remove any debris from the inlet, and rinse the pump with fresh water. Allow it to dry completely before storing.
What liquids can be pumped with this device?
It can pump fresh water, rainwater, and non-flammable liquids compatible with the pump materials. Do not use it for gasoline or chemicals.
How to store the pump when not in use?
Store the pump in a dry, frost-free place, away from direct sunlight. Ensure it is clean and free from any residual water.
What safety precautions should I take?
Always unplug the pump before cleaning or servicing. Never run the pump dry, and avoid touching it with wet hands.
Why is my pump not turning on?
Check the power supply, the fuse, and the float switch. Also ensure the impeller is not blocked by debris. The pump has a thermal overload protector that resets automatically.
Is the pump fully submersible?
Yes, it has an IP68 rating, meaning it can be fully submerged in water up to the maximum depth specified in the manual.
What is the warranty for this Vevor pump?
The Vevor LSDP1-060-070-42 typically comes with a 1-year warranty. Please contact Vevor customer service for details.
User questions about LSDP1-060-070-42 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual LSDP1-060-070-42 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LSDP1-060-070-42 by Vevor.
USER MANUAL LSDP1-060-070-42 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : LSDP1-060-070-42
Category : Water pump