PS 1000-45 - Saw MATRIX - Free user manual and instructions
Find the device manual for free PS 1000-45 MATRIX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | MATRIX |
| Model | PS 1000-45 |
| Power Rating | 1000 W |
| Supply Voltage | 230 V ~ 50 Hz |
| No-Load Speed | 4500 rpm |
| Blade Diameter | 184 mm |
| Blade Bore | 20 mm |
| Max Cutting Depth at 90° | 45 mm |
| Max Cutting Depth at 45° | 32 mm |
| Weight | 4.2 kg |
| Cable Length | 2.5 m |
| Soft Start | Yes |
| Dust Extraction Port | 36 mm adapter |
| Integrated Laser Guide | Yes |
| Safety Switch | Lock-off button |
| Die-Cast Base | For stable cuts |
| Parallel Guide | Included |
| Maintenance | Clean air vents regularly |
| Spare Parts | Available via MATRIX service |
Frequently Asked Questions - PS 1000-45 MATRIX
What is the maximum cutting depth of the MATRIX PS 1000-45?
The maximum cutting depth at a 90° angle is 45 mm. When the base is set at a 45° angle, the maximum cutting depth reduces to 32 mm.
Can I use a different blade size than the original 184 mm?
It is strongly recommended to use the specified 184 mm blade with a 20 mm bore. Using other sizes may compromise safety and cutting performance.
How do I change the saw blade?
Always unplug the saw first. Use the spindle lock to prevent the blade from rotating, then loosen the blade bolt with a wrench. Remove the outer flange, replace the blade, and reassemble in reverse order. Ensure the blade teeth point in the direction of rotation.
Is the MATRIX PS 1000-45 suitable for cutting metal?
This saw is designed for wood and wood-based materials. Cutting metal requires a special metal-cutting blade and appropriate safety measures, which may affect the motor's performance. We advise consulting the manual before doing so.
How should I maintain the saw to ensure its longevity?
Regularly clean the air vents and the blade guard from sawdust. Check the carbon brushes after extended use and replace them when worn. Keep the base plate lubricated to prevent rust. Always store the saw in a dry place.
What safety precautions should I take while using this saw?
Wear safety goggles and hearing protection. Do not wear loose clothing or jewelry. Keep your hands away from the cutting path and use the safety switch to prevent accidental starts. Always clamp the workpiece and use a suitable support.
Can I connect a dust extractor to this saw?
Yes, the saw features a 36 mm dust extraction port that can be connected to a vacuum or dust extractor. For best results, use a vacuum with anti-static hose.
How do I use the integrated laser guide?
Slide the laser switch to ON to project a line that indicates the cutting path. The laser helps achieve accurate straight cuts. Align the marked line on your workpiece with the laser beam before cutting.
What is the power rating and voltage of the saw?
The saw has a 1000 W motor and operates on a standard household supply of 230 V / 50 Hz. This power provides sufficient torque for regular cutting tasks in wood.
How should I store the saw after use?
Clean the saw and remove any sawdust. Run the blade guard closed and secure the power cable. Store in a dry, frost-free area, ideally in its original case or a dedicated toolbox, and out of reach of children.
User questions about PS 1000-45 MATRIX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual PS 1000-45 - MATRIX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS 1000-45 by MATRIX.
USER MANUAL PS 1000-45 MATRIX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MATRIX
Model : PS 1000-45
Category : Saw