PS 1200-55 - Saw MATRIX - Free user manual and instructions
Find the device manual for free PS 1200-55 MATRIX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Circular saw |
| Brand | MATRIX |
| Model | PS 1200-55 |
| Color | Black and blue |
| Rated power | 1200 W |
| Supply voltage | 230 V / 50 Hz |
| Blade diameter | 160 mm |
| Cutting depth at 90° | 55 mm |
| Cutting depth at 45° | 40 mm |
| No-load speed | 5500 rpm |
| Adjustable cutting angle | from 0° to 45° |
| Weight | 4.2 kg |
| Ergonomic handle | Yes, with non-slip coating |
| Parallel cutting guide | Included |
| Vacuum cleaner connection | Yes, 35 mm connection |
| Safety switch | Double switch with lock |
| Blade guard | Mobile protective cover |
| Maintenance and cleaning | Clean the housing and blade after each use |
| Recommended safety | Wear protective goggles and gloves |
| Spare parts available | Replacement blade, motor carbon brushes, cover |
| Repairability | Repair possible by an approved professional |
| Warranty | 2 years |
Frequently Asked Questions - PS 1200-55 MATRIX
How do I replace the blade of my MATRIX PS 1200-55 circular saw?
To replace the blade, first unplug the saw. Use the provided wrench to lock the blade and unscrew the central screw. Remove the old blade and install the new one respecting the indicated rotation direction. Screw back on and make sure the blade is securely attached before plugging it back in.
What is the maximum cutting depth of this saw?
The maximum cutting depth is 55 mm at 90° and 40 mm at 45°. These values allow cutting most common wood boards and panels.
Can I cut metal with this saw?
This saw is designed for wood and wood-derived materials. To cut metal, it is necessary to install a blade suitable for metal and to reduce the speed. However, using metal may reduce the tool's lifespan.
How do I adjust the cutting angle of the saw?
Loosen the angle adjustment knob located at the front of the shoe. Tilt the shoe to the desired angle (from 0° to 45°), then firmly tighten the knob. Check the angle with a square before cutting.
How do I maintain my saw to extend its lifespan?
Clean the saw regularly by blowing out dust, wipe the housing and blade. Sharpen or replace the blade if it becomes dull. Check the motor carbon brushes every six months and lubricate the moving parts with light oil.
What safety equipment should I use?
Always wear safety goggles, work gloves and a dust mask. Use a vacuum cleaner to limit dust and never wear loose clothing that could get caught in the blade.
Can the saw be connected to a vacuum cleaner?
Yes, the saw has a 35 mm extraction connection. You can connect a workshop vacuum cleaner to remove sawdust and improve visibility of the cutting line.
What is the blade diameter?
The blade diameter is 160 mm. The center hole is 20 mm (or 16 mm depending on the version). Use only blades compatible with this diameter and mounting.
What should I do if the saw no longer starts?
First check the outlet and power cable. Then inspect the motor carbon brushes: if worn, replace them. If the problem persists, contact an approved after-sales service for a diagnosis.
How do I clean the blade after use?
Unplug the saw and remove the blade. Clean it with a cloth soaked in degreaser or thinner. Remove any resin or glue. Dry the blade thoroughly and apply a thin coat of anti-corrosion oil before reassembling.
User questions about PS 1200-55 MATRIX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual PS 1200-55 - MATRIX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS 1200-55 by MATRIX.
USER MANUAL PS 1200-55 MATRIX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MATRIX
Model : PS 1200-55
Category : Saw