TE-RH 34/6 4F - Drill EINHELL - Free user manual and instructions
Find the device manual for free TE-RH 34/6 4F EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Rotary hammer (impact drill) SDS-Plus |
| Brand | EINHELL |
| Model | TE-RH 34/6 4F |
| Power supply | Mains 220-240 V, 50 Hz |
| Power input | 1100 W |
| No-load speed | 0-1100 rpm adjustable |
| Impact rate | 0-4800 bpm |
| Impact energy | 6 J |
| Chuck | SDS-Plus |
| Max drilling diameter (concrete) | 34 mm |
| Max drilling diameter (steel) | 13 mm |
| Max drilling diameter (wood) | 40 mm |
| Weight | 5.2 kg |
| Dimensions (L × W × H) | Approx. 390 × 210 × 300 mm |
| Main functions | Drilling, impact drilling, chiseling, reversible rotation |
| Number of functions | 4 (hence the suffix 4F) |
| Variable speed | Yes with progressive adjustment |
| Safety | Double insulation, auxiliary handle with depth stop |
| Maintenance and cleaning | Clean the ventilation slots with a brush after use |
| Spare parts and repairability | Replacement carbon brushes and standard parts available from after-sales service |
| General information | Delivered in a carry case with auxiliary handle and depth stop |
Frequently Asked Questions - TE-RH 34/6 4F EINHELL
Can this EINHELL TE-RH 34/6 4F rotary hammer drill into metal?
Yes, it can drill into steel up to 13 mm with a suitable HSS drill bit. Use a low speed and light pressure, and add a lubricant to prevent the drill bit from overheating.
How do I adjust the speed of the TE-RH 34/6 4F rotary hammer?
The speed is adjusted progressively by pressing the trigger more or less. For hard materials, use a low speed; for soft materials, increase the speed. Set the speed variator to the desired setting.
What is the difference between the 4 functions of the 4F mode?
The 4 functions are: normal drilling (rotation only), impact drilling (rotation + impact), chiseling (impact only) and chisel rotation to adjust the angle. This makes it easy to switch from drilling to chiseling as needed.
How do I change a SDS-Plus drill bit on this model?
Pull the chuck locking ring back, insert the SDS-Plus bit while turning it, then release the ring. Check that the bit is properly locked by pulling on it. To remove it, pull the ring again and take out the bit.
Why does my rotary hammer no longer start?
First check the power outlet, then the power cord. If the problem persists, the carbon brushes may be worn. In that case, replace the carbon brushes, a normal wear part on this type of tool.
What regular maintenance is required?
After each use, remove dust from the ventilation slots with a soft brush or compressed air. Lightly grease the SDS-Plus chuck from time to time to ensure smooth rotation. No other maintenance is required.
Can this rotary hammer be used as a screwdriver?
No, this model is designed for drilling and chiseling. The torque and speed are not suitable for screwdriving. Use a drill driver for this application.
What protection should be used during work?
Always wear safety glasses, ear protection and a dust mask. When chiseling, also wear protective gloves and appropriate hearing protection.
What do the numbers mean in TE-RH 34/6 4F?
TE stands for Einhell, RH for rotary hammer, 34 indicates the maximum drilling diameter in mm in concrete, 6 corresponds to the impact energy in Joules and 4F indicates the 4 functions.
Is this model delivered with accessories?
Yes, it generally includes an auxiliary handle, a depth stop, a carry case and a flat chisel. Some kits may include additional SDS-Plus drill bits.
User questions about TE-RH 34/6 4F EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual TE-RH 34/6 4F - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TE-RH 34/6 4F by EINHELL.
USER MANUAL TE-RH 34/6 4F EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TE-RH 34/6 4F
Category : Drill