DM 675 - Range hood TEKA - Free user manual and instructions
Find the device manual for free DM 675 TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | TEKA |
| Model | DM 675 |
| Product type | Extractor hood |
| Installation type | Built-in hood |
| Width (mm) | 600 |
| Height (mm) | 170 |
| Depth (mm) | 300 |
| Net weight (kg) | 8 |
| Power supply | 220-240 V, 50 Hz |
| Motor power (W) | 150 |
| Maximum airflow (m³/h) | 720 |
| Maximum noise level (dB) | 68 |
| Number of speeds | 4 speeds |
| Lighting | 2 LED lamps (1.5 W each) |
| Grease filter type | Washable aluminium filter |
| Carbon filter (optional) | Recirculation possible with carbon filter |
| Control type | Electronic push buttons |
| Air outlet diameter | 150 mm |
| Maintenance | Monthly cleaning of the grease filter |
| Energy class | A |
| Warranty | 2 years |
Frequently Asked Questions - DM 675 TEKA
How to install the TEKA DM 675 hood?
Installation must be carried out by a qualified technician. Mount the hood on a solid wall at least 70 cm from the cooking surface (120 cm for gas cooking). Make sure the exhaust duct is short and straight for optimum performance. Follow the instructions in the manual and use the supplied wall plugs.
What is the extraction power of the hood?
The hood develops a maximum airflow of 720 m³/h in intensive mode, suitable for rooms up to 20 m². In normal use, speeds 1 to 3 provide an airflow of 350 to 600 m³/h.
How to clean the grease filters?
The aluminium grease filters are washable. They should be cleaned every 3 to 4 weeks depending on use. Wash them by hand in warm soapy water or in the dishwasher at a low temperature. Let them dry and reassemble them without delay.
When should the carbon filter be replaced?
In recirculation mode, the activated carbon filter should be replaced on average every 3 to 6 months. It cannot be cleaned: it must be changed to maintain good suction performance.
How to use the different speeds?
The 4-speed control allows you to adjust the suction: use speeds 1 and 2 for gentle or moderate cooking, 3 for frying and strong odours, and 4 (intensive) for steam peaks. Remember to return to normal speed after a few minutes.
What to do if the hood is too noisy?
Check that the exhaust duct is not blocked and that the filters are clean. A dirty filter reduces airflow and increases noise. If the noise persists, check that the hood is securely mounted and that the motor is working properly. If in doubt, contact after-sales service.
How to change the LED lighting?
The LED lamps are not user-replaceable. If the lighting no longer works, contact an approved technician to replace the entire assembly. It is advisable to turn off the power before any intervention.
Can the hood work in recirculation mode?
Yes, simply install an activated carbon filter (optional) and direct the air outlets indoors. Recirculation mode is ideal when you cannot install an external exhaust duct.
How to reduce the noise level of the hood?
To limit noise, use the lowest speed sufficient for cooking. Make sure the exhaust duct is compliant (150 mm diameter) and has no sharp bends. Clean filters also contribute to quiet operation.
What is the warranty for the TEKA DM 675 hood?
The hood is covered by a 2-year manufacturer's warranty. This warranty covers parts and labour for manufacturing defects. Keep your receipt and note that consumables (carbon filters) are not included.
User questions about DM 675 TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual DM 675 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DM 675 by TEKA.
USER MANUAL DM 675 TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : DM 675
Category : Range hood