CX 63130 KOS - Range hood TEKA - Free user manual and instructions
Find the device manual for free CX 63130 KOS TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in under-cabinet range hood |
| Brand | Teka |
| Model | CX 63130 KOS |
| Finish | Stainless steel |
| Width | 60 cm |
| Depth | 31 cm |
| Height | 18 cm |
| Weight | 12.5 kg |
| Power Supply | 220-240 V, 50 Hz |
| Max Extraction Capacity | 630 m³/h |
| Number of Speeds | 3 speeds + intensive boost |
| Control Type | Touch control panel |
| Lighting | 2 x 3 W LED |
| Grease Filter | Washable aluminium filter |
| Ducting Outlet | 150 mm (also adaptable to 120 mm) |
| Modes | Extraction (ductout) and recirculation (with carbon filter) |
| Timer Function | Delayed shutdown (10 min) |
| Noise Level | Max 65 dB(A) |
| Energy Class | B |
| Annual Energy Consumption | 45 kWh/year |
| Spare Parts Availability | Filters, LEDs, and control board available |
| Installation | Under cabinet or wall mounted |
| Safety Features | Thermal cut-out protection |
Frequently Asked Questions - CX 63130 KOS TEKA
How to install the Teka CX 63130 KOS range hood?
Installation must be done by a qualified technician. Ensure the hood is at least 65 cm above the hob (for gas cooktops) or 60 cm for electric hobs. Fix the hood securely to the wall or under the cabinet, connect the ducting to the 150 mm outlet (adaptable to 120 mm), and wire it to the 220-240 V supply following local electrical codes.
How to clean the grease filters?
Remove the aluminium grease filters from the hood. Wash them in warm soapy water or in the dishwasher at low temperature. Let them dry completely before reinstalling. For best performance, clean the filters every 2 months or more often with heavy cooking.
How to replace the LED lighting?
Turn off the power to the hood. The LED modules are located under the hood. Gently unclip the existing LED module, disconnect the lead, and replace it with a new 3 W LED module compatible with the model. Reconnect and refit the module, then restore power.
What duct diameter should I use for extraction?
The recommended duct diameter is 150 mm. If you need to reduce it to 120 mm, make sure to use a smooth transition and keep the duct as short as possible to maintain airflow efficiency and minimize noise.
How to switch from extraction to recirculation mode?
If you cannot vent outside, you can convert the hood to recirculation. Install an optional activated carbon filter (e.g., Teka reference ACT-100) on the motor outlet. The airflow then passes through the carbon filter and returns the cleaned air into the kitchen.
Why is the range hood very noisy?
Check if the grease filters are clean and properly installed. A blocked or loose ducting can also cause increased noise. Ensure the duct is not kinked or undersized. If the noise persists, the motor may require servicing by an authorized technician.
How do I use the intensive boost speed?
The intensive boost speed is designed to clear stubborn cooking smells. Press the boost button on the touch control panel; the hood will run at maximum power for 5 minutes, then automatically return to the previous speed. Use it when frying or grilling.
What is the correct installation height?
For a built-in under-cabinet hood, the distance from the hob to the bottom of the hood should be 65 cm for gas cooktops and 60 cm for electric or induction cooktops. Follow the exact measurements in the manual for optimal extraction efficiency.
Why is the hood not starting at all?
First, check if the power supply is connected and the circuit breaker is on. Verify that the safety cut-out switch is not triggered. If the control panel is unresponsive, the main board or a sensor may be faulty; contact an authorized service center.
How to reset the filter saturation alarm?
After cleaning or replacing the grease filters, reset the alarm by pressing and holding the timer button for 3 seconds until the indicator light blinks and turns off. Refer to the manual for the exact reset procedure for your model.
User questions about CX 63130 KOS TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual CX 63130 KOS - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CX 63130 KOS by TEKA.
USER MANUAL CX 63130 KOS TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : CX 63130 KOS
Category : Range hood