TEKA

DSH 785 - Range hood TEKA - Free user manual and instructions

Find the device manual for free DSH 785 TEKA in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice TEKA DSH 785 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wall-mounted chimney range hood
Brand Teka
Model DSH 785
Installation Wall-mounted, ducted or recirculating
Width 90 cm
Air Extraction Capacity 530 m³/h
Number of Speeds 3 speeds plus intensive boost
Control Type Push-button panel
Lighting 2 x 3 W LED spots
Grease Filter Dishwasher-safe aluminium mesh filters
Recirculation Option Requires optional activated carbon filter
Exhaust Duct Diameter 150 mm
Minimum Height Above Hob 65 cm electric / 75 cm gas
Noise Level 55-65 dB(A) depending on speed
Voltage 220-240 V, 50 Hz
Motor Power 200 W
Total Power Consumption 280 W
Dimensions (W x D x H) 900 x 500 x 530 mm
Weight 15 kg
Safety Features Thermal cut-out, CE approved
Maintenance Removable washable filters and easy-access lamp cover
Spare Parts Original Teka filters, carbon filters and lamps available
Warranty 2 years manufacturer warranty

Frequently Asked Questions - DSH 785 TEKA

What is the minimum installation height for the Teka DSH 785?
The recommended minimum distance between the hob and the hood is 65 cm for electric cookers and 75 cm for gas cookers for safety and efficient extraction.
How do I clean the grease filters?
Remove the aluminium filters and wash them by hand in warm soapy water or in a dishwasher at 60 °C. Dry thoroughly before refitting and clean them monthly.
Can I use the hood in recirculation mode?
Yes. Insert a charcoal/activated carbon filter into the recirculation kit. The carbon filter is not washable and should be replaced every 3 to 6 months.
How do I replace the lights?
Switch off the power, remove the lamp cover and replace the old bulb with a 3 W LED spot of the same base. Use protective gloves and avoid touching the new bulb directly.
Why is the hood noisy?
Noise increases with suction speed, but loud noise usually indicates clogged filters or a blocked duct. Clean the filters and check that the ducting is smooth and straight.
What diameter of duct should I use?
Use a rigid or semi-rigid duct with a diameter of 150 mm. Keep it as short as possible and avoid sharp bends to maintain maximum airflow.
How do the speed controls work?
The push buttons control three normal speeds plus an intensive boost speed for very steamy cooking. Press the + button to increase speed and the – button to reduce.
What are the overall dimensions of the DSH 785?
The hood measures approximately 900 mm wide, 500 mm deep and 530 mm high. It is designed for wall installation above cookers.
Where can I buy spare parts?
Genuine Teka parts such as grease filters, carbon filters and lamp modules are available from the Teka customer service and authorised dealers. Quote the model number DSH 785.
Does the hood have a safety system?
The motor has a thermal cut-out that protects it from overheating. The appliance is CE certified and should be connected to an earthed outlet.

User questions about DSH 785 TEKA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual DSH 785 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSH 785 by TEKA.

USER MANUAL DSH 785 TEKA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : TEKA

Model : DSH 785

Category : Range hood