DSH 986 - Range hood TEKA - Free user manual and instructions
Find the device manual for free DSH 986 TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Range hood |
| Brand | Teka |
| Model | DSH 986 |
| Installation type | Wall-mounted chimney hood |
| Width | 90 cm |
| Height | 770 mm (adjustable chimney) |
| Depth | 480 mm |
| Weight | 14.5 kg |
| Power supply | 220-240 V, 50 Hz |
| Maximum extraction rate | 650 m³/h |
| Number of motors | 1 |
| Number of speeds | 3 speeds + intensive boost |
| Noise level (max) | 65 dB(A) |
| Lighting | 2 x 40 W LED light strips |
| Filter type | Aluminium grease filter |
| Air extraction modes | Ducted (outdoor) and recirculating |
| Energy efficiency class | B (rating per EU) |
| Control type | Electronic push buttons |
| Duct diameter | 150 mm |
| Maintenance | Clean grease filter monthly with warm soapy water |
| Safety | Always switch off before cleaning; do not flambé beneath the hood |
| Spare parts availability | Genuine Teka parts available via authorized service centres |
| Warranty | 2 years (consumer protection) |
Frequently Asked Questions - DSH 986 TEKA
How often should I clean the grease filter?
For optimal performance, clean the aluminium grease filter every month or after 30 hours of use. You can wash it by hand with warm soapy water or in the dishwasher at a low temperature.
Can the hood be used in recirculation mode?
Yes, the DSH 986 can be used in recirculation mode when you install an activated charcoal filter (sold separately). This is ideal for kitchens without external ducting.
How do I replace the charcoal filter?
The charcoal filter is located behind the grease filter. Remove the grease filter, insert the new charcoal filter, and secure it. Then press the reset button if the hood has a filter saturation indicator.
Why is the hood noisy?
Excessive noise can be caused by blocked filters, incorrect duct installation, or loose parts. Ensure the duct is smooth and without sharp bends, and clean the filters regularly.
What is the correct height for installation?
The hood should be installed at a distance of 65–75 cm above an electric hob and 75–85 cm above a gas hob to ensure efficient extraction and safe operation.
Do I need to connect the hood to a chimney?
If you use ducting mode, you need to connect the hood to an external wall outlet or duct. For recirculation, the air is filtered and returned to the kitchen, so no chimney is required.
How do I clean the stainless steel surface?
Use a soft cloth with a mild detergent or a dedicated stainless steel cleaner. Avoid abrasive pads and chlorine-based products that can damage the surface.
Can I use the hood without a grease filter?
No, never operate the hood without the grease filter. The filter protects the motor from grease build-up and ensures the effective capture of cooking vapors.
What should I do if the lights stop working?
First, ensure the hood is unplugged. Check if the LED lights need replacement. In many models, LED strips are non-dimmable and can be replaced by a technician. Contact an authorized service centre.
Is the motor energy efficient?
The motor is rated energy efficiency class B under EU regulations. For best efficiency, select the appropriate speed rather than always using the highest setting.
User questions about DSH 986 TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual DSH 986 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSH 986 by TEKA.
USER MANUAL DSH 986 TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : DSH 986
Category : Range hood