DG 980 - Range hood TEKA - Free user manual and instructions
Find the device manual for free DG 980 TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Decorative hood |
| Brand | Teka |
| Model | DG 980 |
| Installation type | Wall mounting |
| Width | 900 mm |
| Depth | 500 mm |
| Height | 800 - 1100 mm (adjustable) |
| Net weight | 15 kg |
| Power supply | 220-240 V, 50 Hz |
| Extraction power | 580 m³/h (max) |
| Noise level | 62 dB (standard) |
| Number of speeds | 3 speeds + intensive |
| Control | Electronic push buttons |
| Lighting | Integrated LED (2 x 3 W) |
| Energy class | A |
| Filtration | Aluminum grease filter, carbon filter (optional) |
| Care and cleaning | Regular cleaning of the grease filters with warm soapy water |
| Safety | Automatic shut-off in case of overheating |
| Spare parts and repairability | Filters, LED bulbs and motor available |
| Warranty | 2 years |
Frequently Asked Questions - DG 980 TEKA
How to install my Teka DG 980 hood?
Make sure the wall is solid and respect the recommended distance of 70 cm above an electric cooker and 75 cm above a gas cooker. Securely fix the wall bracket and hang the hood following the instructions in the manual.
How to clean the grease filters?
The aluminum grease filters are removable. Wash them in hot water with detergent or in the dishwasher. Dry them before putting them back. For regular use, clean them every month.
How to replace the carbon filter?
If your hood is installed in recirculation mode, the carbon filter must be replaced every 3 to 6 months. Unclip the grease filter, then replace the carbon filter located behind it, respecting the installation direction.
Why is my hood making noise?
The noise may come from a dirty grease filter, poor fan balancing, or a blocked exhaust duct. Clean the filters and check that the duct is clear. If the noise persists, contact after-sales service.
How to change the LED bulb?
Unplug the appliance, remove the panel or the faulty bulb by pushing or turning it slightly. Replace it with an identical LED bulb (2 W) and put the panel back in place.
What is the minimum distance between the cooking surface and the hood?
Respect a distance of 70 cm for electric cookers and 75 cm for gas cookers. This distance may differ depending on the model, check the manual.
How to switch from extraction mode to recirculation mode?
In recirculation mode, the air is filtered by a carbon filter and then returned to the room. Install the carbon filter (supplied as an option) and block the exhaust duct. If your installation is in extraction mode, remove the carbon filter.
What to do if the hood does not turn on?
First check the electrical power supply and the fuse. If the controls are electronic, a circuit fault may require the intervention of a technician. Test another outlet before contacting customer service.
How to adjust the extraction speed?
Use the push buttons to select the desired speed: speeds 1 to 3 for normal cooking and the intensive function for strong vapors. Press the intensive button for brief use.
Where to find spare parts?
You can order parts such as filters, LED bulbs and the motor from your Teka dealer or directly on the official website. Use the exact reference indicated on the rating plate.
User questions about DG 980 TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual DG 980 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DG 980 by TEKA.
USER MANUAL DG 980 TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : DG 980
Category : Range hood