WHT961S2X - Range hood GORENJE - Free user manual and instructions
Find the device manual for free WHT961S2X GORENJE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | GORENJE |
| Model | WHT961S2X |
| Category | Extractor hood |
| Product type | Decorative wall hood |
| Width | 90 cm |
| Height (adjustable chimney) | 60 - 105 cm |
| Depth | 50 cm |
| Net weight | 24 kg |
| Power supply | 220-240 V / 50 Hz |
| Rated power | 250 W |
| Lighting | LED (2 x 1.5 W) |
| Control type | Electronic touch |
| Number of speeds | 3 speeds + intensive |
| Maximum air flow | 650 m³/h |
| Maximum noise level | 65 dB |
| Grease filters | Washable aluminium |
| Activated carbon filter | Optional accessory |
| Exhaust diameter | Ø150 mm |
| Operating modes | Extraction or recirculation |
| Maintenance | Regular cleaning of filters and stainless steel |
| Safety | Overheat thermostat |
| Protection class | Class II |
| Repairability | Spare parts available (motor, board, LED) |
Frequently Asked Questions - WHT961S2X GORENJE
What installation height for this hood?
The ideal height is 65 to 75 cm above an electric hob and 70 to 80 cm above a gas hob. Respect these distances for optimal performance.
How to clean the grease filters?
The aluminium grease filters can be cleaned by hand or in the dishwasher. Remove them, wash at a low temperature (40°C) without aggressive detergent, then dry them before putting them back.
When to replace the charcoal filter?
The activated carbon filter should be replaced every 3 to 6 months depending on use. It is essential in recirculation mode to neutralize odors. This filter is an optional accessory.
How to activate the intensive speed?
Press the Intensive button to boost the air flow to maximum for 10 minutes. The hood automatically returns to the previous speed. This function is ideal for eliminating strong odors.
The hood does not turn on, what to check?
Check the electrical connection, the circuit breaker and the wall socket. If everything is normal, the problem may come from the electronic board. If the screen stays off, contact a professional.
How to replace the LED lighting?
Cut off the power supply, unclip the light unit and replace the LED lamps of the same type. Use original Gorenje parts to ensure compliance.
Can I use this hood without external exhaust?
Yes, by using an activated carbon filter. The hood then operates in recirculation mode: the air is filtered and then returned to the kitchen. The recirculation adapter is an optional accessory.
Why is my hood noisy?
Possible causes are a dirty filter, an obstructed exhaust duct or an unstable installation. Clean the filters, check the duct and tighten the fixings. If the noise persists, the motor may be defective.
How to maintain the stainless steel surface?
Use a soft cloth with soapy water or a specific stainless steel cleaner. Wipe in the direction of the brush finish and dry with a microfibre cloth to avoid marks.
The touch controls are blocked, what to do?
Turn off the hood at the circuit breaker for 2 minutes then turn it back on. If the problem persists, there may be an electrical surge or an electronic fault. Test the function after the cut-off.
User questions about WHT961S2X GORENJE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual WHT961S2X - GORENJE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WHT961S2X by GORENJE.
USER MANUAL WHT961S2X GORENJE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GORENJE
Model : WHT961S2X
Category : Range hood