HT-LGB-100 - Washing machine Hillvert - Free user manual and instructions

USER MANUAL HT-LGB-100 Hillvert

The user manual is designed to assist in the safe and trouble-free use of the device. The product is designed and manufactured in accordance with strict technical guidelines, using state-of-the-art technologies and components. Additionally, it is produced in compliance with the most stringent quality standards.

DO NOT USE THE DEVICE UNLESS YOU HAVE THOROUGHLY READ AND UNDERSTOOD THIS USER MANUAL.

To increase the product life of the device and to ensure trouble-free operation, use it in accordance with this user manual and regularly perform maintenance tasks. The technical data and specifications in this user manual are up to date. The manufacturer reserves the right to make changes associated with quality improvement.

LEGEND

Read instructions before use.

PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may differ from the actual product.

The original operation manual is in German. Other language versions are translations from German.

2. USE GUIDELINES

The product is intended to be placed on a properly prepared surface.

• This product does not serve to lay regular roadways or commercial parking areas.
- This product is intended for laying roads, parking spots, pedestrian paths on private lots and premises of low traffic volume.

The user is liable for any damage resulting from unintended use of the device.

2.1. DESCRIPTION

Substrate preparation

1. Using stakes and a string, mark out the shape of the surface to be covered with the lawn grid.
2. Remove the top layer of soil. For better soil stabilization, the exposed surface can be covered with building fleece or geotextile.
3. Fill the area with a well- permeable gravel or gravel mix. The thickness of the layer depends on the intended use of the surface.

The filling should consist of two layers:

• foundation layers applied in the technology of mechanical stabilization or breakstone foundation,
• levelling ballast, sand or sand-gravel bedding thickness up to 0.05 m, grain size D≤4 mm.

PLEASE NOTE: The type and amount of filling should be adapted to the intended use of the area covered with the grid and to the standards applicable in your country.

1. Align and compact the prepared substrate mechanically using a rammer and vibrator.

Laying the lawn grid

PLEASE NOTE: The minimum ambient temperature while laying the lawn grid must be 5° C.

1. The grid should be arranged starting from the corner of the area to be covered.
2. The grid has protruding hinges on one side, which click into another grid on the side not equipped with this connection.

A paved surface can be curbed with a concrete curb, battens or edges.

Top layer

1. The lawn grid can be filled with:

• soil and sown grass seeds,
• 4/8 or 8/18 mm aggregate
• humus and grass rolls.

1. The height of filling the grid with soil should be approx. 0.5 cm below its upper edge - it protects the grass roots from spreading. If the lawn grid is covered with aggregate, its walls should be covered completely. Top up the aggregate should it consolidate.

DANE TECHNICZNE

OUR CUSTOMERS' SATISFACTION IS OUR MAIN GOAL! PLEASE CONTACT US WITH QUESTIONS AT:

NASZYM GŁÓWNYM CELEM JEST SATYSFAKCJA KLIENTÓW W PRZYPADKU PYTAŃ PROSIMY O KONTAKT Z PRZEDSTAWICIELEM W DANYM KRAJU:

CONTACT

expondo Polska sp. z o.o. sp. k.