HI-WG-120 - Washing machine Hillvert - Free user manual and instructions

Product Type	Welded Gabion
Brand	Hillvert
Model	HI-WG-120
Dimensions (Width x Depth x Height)	30 x 80 x 100 cm
Weight	20 kg
Material	Welded steel wire mesh
Assembly	Manual assembly required
Fasteners Included	Spiral wires and hook wires
Application	Retaining walls, garden borders, decorative structures
Power Supply	Not required (non-electric product)
Maintenance	Clean with water, inspect for rust, tighten loose wires
Cleaning	Use mild detergent and water with a soft brush
Safety	Wear protective gloves; keep children and animals away
Spare Parts	Spiral wires, hook wires, and individual panels
Repairability	Can be disassembled and replaced damaged components
Intended Use	Building gabion structures

Frequently Asked Questions - HI-WG-120 Hillvert

What is the Hillvert HI-WG-120?

The Hillvert HI-WG-120 is a welded gabion designed for building retaining walls, garden borders, and decorative structures. It consists of steel wire mesh panels that are assembled using spiral and hook wires.

What are the dimensions of the HI-WG-120?

The dimensions of the HI-WG-120 are 30 cm width x 80 cm depth x 100 cm height. These measurements are approximate and may vary slightly due to manufacturing tolerances.

How much does the HI-WG-120 weigh?

The HI-WG-120 weighs approximately 20 kg. This weight is for the complete set of panels and fasteners included in the package.

What materials is the gabion made of?

The gabion is made of welded steel wire mesh which provides strength and durability. The connections use spiral wires and hook wires to securely lock the panels together.

How do I assemble the HI-WG-120?

To assemble, connect the gabion panels using the long spiral wires along the edges, then use the short spiral wires for the sides, and finish by attaching the hook wires. Follow the step-by-step instructions in the manual.

Are any tools required for assembly?

No special tools are required. The assembly is done manually using the provided wires and hooks. Basic hand tools like pliers may be helpful but are not strictly necessary.

Can I use the HI-WG-120 for a retaining wall?

Yes, the HI-WG-120 is ideal for retaining walls, garden edging, and soil stabilization. It can be filled with stones or gravel to create a sturdy structure.

How should I maintain the gabion?

Regular maintenance involves cleaning with water to remove dirt, checking for rust, and tightening any loose wires. If rust appears, treat it with a rust-inhibitor or repaint the affected areas.

Does the gabion require a power supply?

No, the HI-WG-120 is a non-electric product and does not require any power supply. It is a purely mechanical structure that is assembled manually.

Can I buy replacement parts for the HI-WG-120?

Yes, replacement parts such as spiral wires, hook wires, and individual panels are typically available. Contact Hillvert customer service or your local dealer to order specific components.

USER MANUAL HI-WG-120 Hillvert

AUFBAU DES PRODUKTES:

TECHNICAL DATA

Parameter description	Werte
Product name	WELDED GABION
Model	HI-WG-110	HI-WG-120	HI-WG-130
Dimensions[Width x Depth x Height; cm]	30x50x100	30x80x100	50x50x100
Weight [kg]	15	20	19

LEGEND

Read instructions before use.

WARNING! or CAUTION! or REMEMBER!

A general warning sign concerning a given situation.

Wear protective gloves.

ATTENTION! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury or even death.

The terms „device“ or „product“ are used in the warnings and instructions to refer to WELDED GABION.

a) Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use common sense when working with the device.
b) Children or unauthorised persons are forbidden to enter a work station. (A distraction may result in loss of control over the device).
c) Keep packaging elements and small assembly parts in a place not available to children.
d) Keep the device away from children and animals.
e) When working with the device, use common sense and stay alert. Temporary loss of concentration while using the device may lead to serious injuries.
f) Use personal protective equipment as required for working with the device, specified in section 1 (Legend). The use of correct and approved personal protective equipment reduces the risk of injury.
g) Do not overestimate your abilities. When using the device, keep your balance and remain stable at all times. This will ensure better control over the device in unexpected situations.
h) To ensure the operational integrity of the device, do not remove factory-fitted guards and do not loosen any screws.
i) When transporting and handling the device between the warehouse and the destination, observe the occupational health and safety principles for manual transport operations which apply in the country where the device will be used.
j) It is forbidden to interfere with the structure of the device in order to change its parameters or construction.
k) Keep the device away from sources of fire and heat.
I) Do not overload the device.

ATTENTION! Despite the safe design of the device and its protective features, and despite the use of additional elements protecting the operator, there is still a slight risk of accident or injury when using the device. Stay alert and use common sense when using the device.

The Product is intended to build a gabion.

ASSEMBLING THE PRODUCT:

d) Gabion panel
e) Spiral wire
f) Hook wire

1. Connect the big gabion panel with the long spiral wires.

1. Connect the 4 big gabion panels with the long spiral wires.

1. Install the hook wires.

1. Connect all sides with the short spiral wires.

DANE TECHNICZNE

OUR CUSTOMERS' SATISFACTION IS OUR MAIN GOAL!

PLEASE CONTACT US WITH QUESTIONS AT:

NASZYM GŁÓWNYM CELEM JEST SATYSFAKCJA KLIENTÓW

W PRZYPADKU PYTAŃ PROSIMY O KONTAKT Z PRZEDSTAWICIELEM

W DANYM KRAJU:

CONTACT

expondo Polska sp. z o.o. sp. k.