HT-COSTIGAN-50X12S02 - Washing machine Hillvert - Free user manual and instructions

Product type	Drip hose set for garden irrigation
Model	HT-COSTIGAN-50X12S02
Hose length	50 meters
Operating pressure	4 bar
Inner diameter	12 mm
Weight	5 kg
Material	Plastic (PVC)
Area of application	Irrigation of beds, vegetable and flower plants
Connection	Plastic connector for standard garden hoses
Operating principle	Drip irrigation along the entire hose
Scope of delivery	Drip hose, connector, plastic connector, distribution piece, plug
Assembly	Simple assembly without special tools
Extension	Hose can be extended/split with connecting pieces or distributors
Maintenance	Rinse off after use and store dry
Cleaning	With non-corrosive cleaning agents, no sharp objects
Storage	Cool, dry, protected from direct sunlight
Safety instructions	Read the operating instructions before use, wear protective gloves
Repair	Only by the manufacturer's customer service, use original spare parts
Water supply	Clean water, no other liquids
Special features	Even water distribution thanks to integrated plug

Frequently Asked Questions - HT-COSTIGAN-50X12S02 Hillvert

How do I connect the drip hose set to my garden hose?

You must mount the plastic connector onto the hose end. To do this, place the screwed-on part onto the hose, push the hose onto the connection flange and tighten the screw cap. Then you can connect the garden hose directly to the connector.

Can I extend the length of the drip hose?

Yes, the drip hose can be extended or split with connecting pieces or distribution pieces. Simply insert the hose end into the connecting piece. The end of the drip hose must be closed with the plug to ensure even irrigation.

What water pressure does the drip hose set require?

The maximum operating pressure is 4 bar. Do not exceed this pressure to avoid damage to the hose. Make sure the water is clean and free of solids.

How do I install the drip hose set correctly?

Lay the drip hose along the plants and make sure the drip openings point upwards. Cut the hose to the desired length, mount the plastic connector and close the other end with the plug. Connect the garden hose to the water source and slowly open the water supply.

How do I clean the drip hose set?

Disconnect the set from the water source. Use only non-corrosive cleaning agents and a soft cloth. Avoid sharp or metallic objects such as wire brushes, as they can damage the surface. Dry all components thoroughly after cleaning.

Is the drip hose set suitable for all plants?

Yes, the set is ideal for drip irrigation of vegetables, flowers and shrubs. It is particularly suitable for row crops. Make sure the drip spacing matches the plants.

What to do if the water does not drip evenly?

Make sure the plug is tightly closed at the end. Check whether the hose is kinked or pinched. If necessary, clean the drip openings and the connector from deposits.

What accessories are included in the scope of delivery?

The scope of delivery includes a drip hose, connector, plastic connector, connecting pieces/distribution piece and a plug.

Can I connect the drip hose set to an irrigation system with a timer?

Yes, you can connect the garden hose to a timer to automate irrigation. Make sure that the operating pressure of 4 bar is not exceeded.

How do I store the drip hose set in winter?

Drain the hose completely and store it in a dry, cool place, protected from direct sunlight. Avoid frost, as the water in the hose can freeze and cause damage.

USER MANUAL HT-COSTIGAN-50X12S02 Hillvert

1. General Description

The instruction manual is intended to assist in safe and reliable use. The product is designed and manufactured strictly according to technical specifications using the latest technology and components and maintaining the highest quality standards.

PLEASE CAREFULLY READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE OPERATION,

To ensure long and reliable operation of the unit, make sure to operate and maintain it properly in accordance with the guidelines in this instruction manual. The technical data and specifications contained in this instruction manual are up to date. The manufacturer reserves the right to make changes in order to improve the quality. Taking the technical progress and the possibility of reducing noise into account, the unit is designed and built in such a way so that risks resulting from noise emissions are reduced to the lowest possible level.

Explanation of symbols

	Please read the instructions before use.
	Wear protective gloves.

CAUTION! The illustrations in this instruction manual are for reference only and may differ from the actual product in some details.

2. Safety of use

CAUTION! Read all safety warnings and all instructions. Failure to follow warnings and instructions could result in serious injury or even death.

The term "unit" or "product" in the warnings and in the description of the instructions refers to the SOAKER HOSE SET.

2.1. Safety in the workplace

a) Keep the work area tidy and well lit. Disorder or poor lighting can lead to accidents. Be foresighted, watch what you are doing and use common sense when using the unit.
b) If you have any doubts as to whether the unit is working properly or if it is damaged, contact the manufacturer's service department.
c) Only the manufacturer's service department may repair the unit. Do not carry out repairs yourself!
d) No children or unauthorized persons are allowed in the work area. (Inattention may result in loss of control of the unit.)
e) Hose connection and disconnection should be done with the water valve closed.
f) Do not shut off the water supply by crushing or kinking the hose.

Please note! Keep children and other bystanders safe while operating the unit.

2.2. Personal safety

a) Do not operate this unit if you are tired, ill or under the influence of alcohol, drugs or medication that could impair your ability to operate the unit.
a) Use caution and common sense when operating this unit. A moment's inattention during operation may result in serious personal injury.
b) Do not overestimate your capabilities. Maintain body balance and equilibrium at all times during operation. This allows for better control of the machine in unexpected situations.

2.3. Safe use of the unit

a) Do not overload the unit. Use tools that are suitable for the application. A correctly selected unit will do a better and safer job for which it was designed.
b) Keep the unit out of the reach of children.
c) Repairs and maintenance should be carried out by qualified personnel using only original spare parts. This will ensure the safety of use.
d) Use clean water to power the unit, no other liquids are allowed.

3. Rules of use

The product is designed to extend the distance between the water source and the point of use.

The user is responsible for any damage resulting from misuse.

3.1. Description

1. Dripline
2. Connector
3. Plastic connector
4. Connectors/distributors
5. Stopper

3.2. Preparation for operation

ASSEMBLY OF THE UNIT

1. Install the plastic connector (3) on the end of the hose, put the unscrewed part on the hose, seat the hose on the connector flange, then tighten the nut.

1. To extend or split the drip line, seat one end of the hose on the coupler or distributor (4).

1. Secure the end of the drip line with a cap (5) to ensure even water distribution.

3.3. Working with the unit

1. Before uncoiling and coiling the hose, always make sure that the supply and receiving units are unhooked.
2. Before attaching the coupling parts, clean the surface of any dust or sand, clean surfaces will provide a better seal at the couplings.
3. Lay the dripline on the ground, then connect the garden hose using the plastic connector (3).

1. Hook the garden hose to the water source and open the water supply.

2. Check that drip irrigation occurs at the correct intervals, small water particles should appear along the entire length of the drip line.

3. Make sure the drip line is properly spaced to irrigate the vegetation.

3.4. Cleaning and maintenance

a) Disconnect the unit from the water supply before cleaning.
b) Use only non-corrosive cleaning agents for cleaning the surfaces.
c) After each cleaning, all the parts should be dried well before the unit is used again.
d) Store the unit in a dry and cool place protected from moisture and direct sunlight.
e) Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for cleaning, as these may damage the surface of the material from which the unit is made.

Dane techniczne

OUR CUSTOMERS' SATISFACTION IS OUR MAIN GOAL! PLEASE CONTACT US WITH QUESTIONS AT:

NASZYM GŁÓWNYM CELEM JEST SATYSFAKCJA KLIENTÓW W PRZYPADKU PYTAŃ PROSIMY O KONTAKT Z PRZEDSTAWICIELEM W DANYM KRAJU:

NAŠÍM HLAVNÍM CÍLEM JE SPOKOJENOST NAŠICH ZÁKAZNÍKŮ! V PŘÍPADĚ OTÁZEK NÁS PROSÍM KONTAKTUJTE NA:

NOTRE BUT PREMIER EST VOTRE SATISFACTION! POUR TOUTE QUESTION, CONTACTEZ NOUS SUR: