Perfectsurface 1000 Stand Disc - Sander CECOTEC - Free user manual and instructions

Product type	Bench disc sander
Brand	Cecotec
Model	PerfectSurface 1000 Stand Disc
Power supply	220-240 V ~ 50 Hz
Power	1000 W
Disc diameter	150 mm
Rotation speed	2950 rpm
Worktable	Tilting, with angle guide
Dust extraction	Connection for external suction
Protection	Disc guard
Safety	Safety switch with emergency stop
Usage	Sanding wood, metal and plastics
Maintenance	Regular cleaning and dust extraction
Spare parts	Available through Cecotec technical service
Warranty	2 years
Recycling	Compliant with WEEE and RoHS directives
Dimensions	33 x 31 x 32 cm
Weight	6.5 kg
Noise level	82 dB(A)
Package contents	Sander, abrasive disc, angle guide, clamping key

Frequently Asked Questions - Perfectsurface 1000 Stand Disc CECOTEC

How do I change the abrasive disc on the sander?

First unplug the appliance. Use the provided clamping key to unscrew the central screw, remove the old disc, place the new one, then retighten the screw. Check that the disc is properly centered before restarting the machine.

Can I sand metal with this disc sander?

Yes, the PerfectSurface 1000 Stand Disc sander is suitable for sanding wood, metal and plastics. Use an appropriate abrasive disc and wear personal protective equipment.

How do I adjust the angle of the worktable?

Loosen the locking knob located under the table, tilt the table to the desired angle (usually 0° to 45°), then retighten the knob firmly. Check the angle using a square if necessary.

How do I clean the sander after use?

Unplug the appliance, vacuum the dust from the disc and inside the guard with a vacuum cleaner. Wipe the external surfaces with a dry cloth. Never use solvents or water to clean the machine.

What speed is recommended for sanding wood?

The speed is fixed (around 2950 rpm), which is perfectly suited for sanding wood. For optimal results, use a suitable grit and apply light and even pressure.

Is this sander suitable for professional use?

This sander is ideal for intensive work in a workshop or at home. Its 1000 W power and tilting table make it versatile for various projects, but for continuous industrial use, a more robust model would be preferable.

How do I connect a vacuum cleaner for dust extraction?

Use the connection fitting located at the rear of the machine. Attach the vacuum hose to the nozzle. You can also use a dust separator to optimize suction.

What should I do if the sander does not start?

Check that the outlet works, that the power cord is not damaged, and that the disc is not blocked. If the problem persists, contact the approved technical service for a diagnosis.

What accessories are included in the package?

The package includes the sander, an abrasive disc, an angle guide, a clamping key and the instruction manual. Some models may also include a mounting flange for the table.

Where can I find spare parts?

Spare parts are available from the official Cecotec technical service. Check the brand's website or contact customer support to order parts such as the disc, motor brushes or the table.

USER MANUAL Perfectsurface 1000 Stand Disc CECOTEC

Manual de instrucciones Instruction manual

EN · Scan the QR code to access the instruction manual in more languages.

Safety instructions 17

ÍNDICE

1. Parts and components 36
2. Before use 36
3. Operation 37
4. Cleaning and maintenance 39
5. Technical specifications 40
6. Disposal of old electrical and electronic appliances 41
7. Technical support and warranty 42
8. Copyright 42
9. Declaration of conformity 42

NOTA

EU01_100049_PerfectSurface 1000 Stand Disc

EN · The coding in this manual is generic and applies to all code variants of the appliance.

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• WARNING: read all safety warnings, instructions, figures and specifications supplied with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
• WARNING: read all safety warnings and instructions marked with the symbol.
• Keep all safety warnings and instructions for future reference.

1) Work area safety

a) Keep the work area clean and well illuminated.
b) Do not operate power tools in explosive environments, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that can light dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can make you lose control of the tool.

2) Electric safety

a) The power tools plugs must match the socket. Never modify the plug. Do not use adapter plugs with earthed power tools. The unmodified plugs and the suitable sockets reduce the risk of electric shock.
b) Avoid body contact with earthed surfaces, like pipes, radiators, stoves and refrigerators. There is a higher risk of electric shock if your body is in touch with the ground.
c) Do not expose power tools to rain or wet conditions. The

water inlet in a power tool increases the risk of electric shock.

3) Personal safety

a) Stay alert and use common sense when using a power tool. Do not use power tools if you are tired or under the influence of drugs, alcohol or medication. Lack of attention while operating power tools can result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective gear, like dust mask, non-slip safety footwear, helmet or hearing protection, used under the appropriate conditions, will reduce the risk of injuries.
c) Avoid unintentional start-up. Make sure the switch is in off position before connecting the tool to a power source and/or battery, or before picking it up or transporting it. Carrying power tools with your finger on the switch or plugging in power tools with the switch in the On position will result in injuries.
d) Remove any spanners or wrenches before switching on the power tool. Leaving a spanner or wrench in a rotary piece of the tool may cause injuries.
e) Do not exert too much force when using the tool. Keep your feet firmly on the ground and maintain your balance at all times. This will provide better control of the electric tool in unexpected situations.
f) Wear appropriate clothes. Do not wear loose clothing or jewellery. Keep hair and clothing away from moving parts. Loose clothing, jewellery or long hair can get caught in moving parts.
g) If adapters are provided for the connection of dust

extraction and collection, ensure that they are connected and used correctly. Dust vacuuming can reduce dust-related risks.

h) The confidence gained from frequent use of tools should not be a reason for ignoring general security principles. A careless action can cause serious injury in a fraction of a second.

4) Use and care of electric tools

a. Do not force the power tool. Use the appropriate power tool for the project. The proper electric tool will make your work better and safer using the speed for which it was designed.

b. Do not use the power tool if the switch does not switch it on and off. Any electric tool that cannot be controlled with a switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories or storing it. These preventive safety measures reduce the risk of the power tool starting up accidentally.

d. Store idle electric tools out of the reach of children and do not allow people unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of inexperienced users.

e. Maintenance of power tools and accessories. Check if the moving parts are misaligned or stuck, if there are broken pieces or any other condition that may affect operating of the electric tool. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Cutting tools properly maintained and with sharp cutting edges are less likely to jam and are easier to handle.

g. Use the electric tool, accessories and drill bits, etc. according to these instructions, taking into account work conditions and the work to be carried out. Use of the power tool for operations other than those intended could result in a hazardous situation.

h. Keep handles and gripping surfaces dry, clean and free of oil and grease. Slippery gripping surfaces do not allow safe handling and control of the tool in unexpected situations.

5) Use and care of the batteries

a) Only recharge with the charger specified by the manufacturer. A charger suitable for one type of battery may create a fire hazard if used with another type of battery.

b) Use the power tool only with specifically designated battery packs. Use of any other type of battery may create a risk of injury and fire.

c) When the battery is not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails, screws or other small metal objects, which can establish a connection from one terminal to another. A short circuit between the battery terminals can cause burns or fire.

d) Under harsh conditions, liquid may leak from the battery; avoid touching it. In case of accidental contact, rinse the affected part with water. If the liquid comes into contact with eyes, seek medical assistance immediately. Liquid leaking from the battery can cause skin irritation and burns.

e) Do not use a damaged or modified battery or tool. Damaged or modified batteries can show unpredictable behaviours leading to fire, explosion or risk of injury.
f) Do not expose a battery or tool to fire or excessive temperatures. Exposition to fire and high temperatures over 130\ °C could cause an explosion.
g) Follow all charging instructions and do not charge the battery or the tool outside the temperature range specified in the instructions. Improper charging or charging at temperatures outside the specified range may damage the battery and increase the risk of fire.

6) Service

a) Have your power tool serviced by a qualified technician using only identical replacement parts. This ensures that the power tool remains safe.
b) Never repair damaged batteries. Battery maintenance must only be carried out by the manufacturer or authorised technician.

7) Charging safety

• Children aged from 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use the charger if they have been given supervision or instruction concerning use of the power tool in a safe way and understand the hazards involved.
• Children must not play with the power tool or the power cable.
• Cleaning and maintenance tasks must not be carried out by unsupervised children.
• The power cable of this charger is not replaceable. Discard the charger if the power cable is damaged.

PERFECTSURFACE 1000 STAND DISC

8) Use and handling of the charger

• Connect the charger only if the voltage of the socket matches the information on the rating plate.
• Connect the charger only to an easily accessible socket so that you can quickly disconnect it from the mains in the event of a malfunction.
• Always allow sufficient ventilation when charging the battery; gases may be released.
• Do not charge non-rechargeable batteries.
• Keep the charger away from humidity.
• Never use the charger in environments where explosive or flammable materials are present. There is a risk of fire and explosion.
• Do not place objects on top of the charger and do not cover it.
• Keep the charger away from heat sources.
• Regularly check the charger for damage.
• Repair damaged chargers properly before reusing them.
• The charger must not be disassembled. Repairs should only be carried out by an authorised technician.
• Do not use the charger if it has been subjected to shocks or falls.
• Always unplug the charger from the power supply after use.
• Unplug the charger from the power supply before cleaning, servicing, storing and transporting, and allow it to cool completely.

9) General precautions

- Hold the electric tool by the insulated gripping surfaces when performing an operation in which the tool may come into contact with exposed wiring. The tool must

not come into contact with live wires. This may result in electric shock.

• Keep the power tool and its accessories away from hot surfaces.
• Do not allow untrained people use the power tool and its accessories.
• People with physical or mental disabilities must not use power tools or accessories without supervision.
• Children must not play with, clean or try to repair the power tool and its accessories.
• Allow the tool to cool down completely after use before touching it.
• Always wait until all moving parts have stopped after working with the tool.

SPECIFIC SAFETY RULES

Warning! Some particles from sanding, sawing, grinding, drilling and other activities contain chemicals that cause cancer, birth defects and other reproductive problems. Some examples of these chemicals are:

• lead from lead-based paints, crystalline silica from bricks, cement and other masonry products,
• arsenic and chromium in chemically treated wood (CCA).

The risk of being exposed to these chemicals varies according to the frequency with which this type of work is carried out. In order to reduce exposure to these chemicals, it is recommended to work in well-ventilated areas and to use approved safety equipment, such as dust masks specially designed to filter out microscopic particles.

- Avoid prolonged contact with dust from sanding, sawing, graining, drilling and similar activities. Wear protective clothing and wash exposed areas with soap and water.

PERFECTSURFACE 1000 STAND DISC

Allowing dust to enter your mouth, eyes or come into contact with your skin can cause absorption of harmful chemicals.

Warning! Use of this tool may generate or disperse dust particles, which can cause permanent and serious respiratory or other injuries. Always wear appropriate respiratory protection for dust exposure. Keep particles away from the face and body.

WARNING! Wear appropriate hearing protection during use. Under certain conditions and with prolonged use, the noise generated by this appliance may promote hearing loss.

• Always wear appropriate respiratory and eye protection.
• Clean your tool periodically.
• Before using the tool on metal or metal-containing parts, be sure to remove the dust collection tank.
• Wear gloves when working with metal parts.
• SANDING OF LEAD-BASED PAINTS. Sanding of lead-based paints is NOT RECOMMENDED due to the difficulty in controlling contaminated dust. The greatest danger of lead poisoning is for children and pregnant women. Since it is difficult to identify whether or not paint contains lead without a chemical analysis, we recommend that you consider the following precautions when sanding any type of paint:

Personal safety

• Do not allow children or pregnant women in the work area when sanding paint until you have finished cleaning up.
• The use of dust masks is recommended for all people entering the work area. The filter should be replaced daily or when the user has difficulty breathing.
• Note: only masks suitable for working with dust and paint fumes should be used. Common paint masks do not offer this

protection. Visit your local tool retailer for the appropriate mask.

• DO NOT EAT, DRINK OR SMOKE in the work area to avoid ingesting contaminated paint particles. Users must wash and clean themselves BEFORE eating, drinking or smoking. Eating, drinking and smoking items should not be left in the work area where dust will settle on them.
• Avoid abnormal postures when sanding. Make sure you stand securely and keep your balance at all times.
  WARNING! Never remove loose chips, shavings or jammed pieces of wood while the sanding disc is in operation. To remedy faults or remove jammed pieces of wood, switch off the machine and unplug the mains plug.
  Warning! This power tool generates an electromagnetic field during operation. In certain circumstances, this field may affect active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend that people with medical implants consult their doctor and the implant manufacturer before using the power tool.

Environmental safety

• Paint must be removed in such a way as to minimise the amount of dust generated.
• Areas where paint is being removed should be sealed with 4 mm thick plastic sheeting.
• Sanding must be done in such a way as to reduce paint run-off outside the working area.

Cleaning and waste

- All surfaces in the work area must be thoroughly vacuumed and cleaned daily for the duration of the sanding project.

PERFECTSURFACE 1000 STAND DISC

The contents of the dust collection tank must be emptied frequently.

• Always empty the dust collection tank immediately after switching off the tool. The dust in the dust tank and some parts of the sander may burn in certain situations, e.g. if sparks occur when sanding metal. In addition, the risk of fire increases if the dust is mixed with paint, polyurethane residues or other chemicals, or if the part you have sanded is too hot. Check in the instruction manual of your vacuum cleaner whether it is suitable for suction of the dust produced by the sander.
• The plastic sheets must be collected and disposed of with any paint residue. They should be deposited in sealed receptacles and disposed of through normal waste collection procedures. During cleaning, children and pregnant women should be kept away from the immediate work area.
• All toys, washable furniture and utensils used by children should be washed thoroughly before reuse.

Symbol	Meaning
	Warning
	Warning, flammable material
	Information
	For indoor use only
	Class II tool
	Wear a protective mask
	Refer to the instruction manual/brochure
	Wear protective gloves
	Wear eye protection
	Use hearing protection

PERFECTSURFACE 1000 STAND DISC

ESPAÑOL

1. PIEZAS Y COMPONENTES

Figura 1

1. Sanding disc
2. Speed knob
3. Power switch
4. Compartment
5. Power cable
6. Angle scale
7. Angle fixing screw
8. Washer
9. Screw
10. Structure of the sanding table
11. Sanding table
12. Groove
13. Mitre gauge stop
    13a Rail
    13b Screw
14. Elbow joint
15. Vacuum cleaner adapter
16. Locking screw
17. Allen key
18. Sanding paper
19. Angle fixing screw

NOTE:

The graphics in this manual are schematic representations and may not exactly match the device.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place to prevent damage to the device if you need to transport it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

ENGLISH

• Do not remove the serial number of the appliance in order to keep a correct traceability of it in case of assistance.
• Before using the appliance for the first time, carry out a test run for at least 1 minute without load and at full power. Avoid exposing yourself to any risk.

Box content

• Sander
• Screw clamp
• Spare sanding paper x5
• Vacuum cleaner adapter
• Instruction manual

3. OPERATION

Note:

To prevent accidental starting, be sure to disconnect the tool from the mains before making any adjustments or performing any maintenance or repair work.

Before operating the tool, secure it firmly to prevent it from falling over.

A. Securing the sander. Fig. 2

1. Attach the sander horizontally (1) or vertically (2) to the work surface.
2. The screw clamp provided (16) must fit into one of the two compartments (4).

Assembling/disassembling the sanding table

Disassembling the sanding table

1. Loosen the screw (19) on both sides.
2. Separate the sanding table (10) from the tool.

Assembling the sanding table

1. Replace the sanding table (10) on the tool.
2. Fix it again on both sides with the corresponding screw (19).

Changing the sanding paper

Warning! Risk of injury. Disconnect the tool from the mains to prevent unintentional starting.

To change the sanding paper more easily, first remove the sanding table (10).

PERFECTSURFACE 1000 STAND DISC

ENGLISH

Fitting the sanding paper

1. Place the sanding paper (18) on the disc (1) and apply even pressure on them.

Removing the sanding paper

1. Remove the sanding paper (18) from the disc (1).

Test run

Test the sander at full power for 1 minute each time you change the sanding paper. Avoid exposing yourself to any risk.

Adjusting the angle of the sanding table

The angle of the sanding table (10) can be gradually adjusted between -10° and +50° .

To do so, follow the instructions below:

1. Loosen the screws (19).
2. Set the desired angle.
3. Then, retighten the screws (19).

Use of the mitre gauge stop

1. Loosen the mitre gauge stop screw (13b).
2. Slide the rail (13a) to the desired position in the groove (12) of the sanding table (11).
3. Using the angle scale, set the desired angle on the rail mark (13a).
4. Secure the mitre gauge (13) by tightening the screw (13b).

B. Connecting a vacuum cleaner. Fig. 3

Warning: check in the instruction manual of your vacuum cleaner whether it is suitable for suction of the dust produced by the sander.

For assembly, follow the steps below:

1. Fit the elbow joint (14) into the corresponding hole in the tool. Make sure that the tabs of the elbow joint (14) fit into one of the two slots in the corresponding hole.
2. Rotate the elbow joint (14) to a vertical or horizontal position to secure it in place and prevent it from falling.

Removing the vacuum cleaner adapter

1. To remove the elbow joint (14), twist and pull it out.

It can be removed when the arrow on this part is aligned with the corresponding mark on the tool.

The tool is supplied with an additional adapter (15) with a larger diameter which can be checked to the elbow joint (14) if required. If required, you can connect the vacuum cleaner directly to the tool, using the elbow joint.

ENGLISH

Switching off/on the sander

WARNING: make sure that the supply voltage matches the rated voltage indicated on the sander's rating plate.

1. Plug the power cable into the power supply.
2. Select the desired speed with the knob (2).

Switching on the sander

1. Place the power switch (3) in the on position. At this point, the sander will start up.

Switching off the sander

1. Place the power switch (3) in the off position. At this point, the sander will switch off.
2. Next, unplug the power cable (5) from the power socket.

Note: wait until the tool has reached its maximum speed before starting to sand.

Sanding

The arrow on the sanding disc (1) indicates the direction of rotation of the sander. Use the knob (2) to select the desired speed setting.

Sanding in horizontal position (Figure 2 - 1)

Place the workpiece to be sanded on the sanding table (11) and slowly position it at the desired angle to the left half of the sanding disc (1).

Sanding in vertical position (Figure 2 - 2)

Slowly bring the workpiece to the desired angle of the sanding disc (1).

Warning! Do not touch the sanding disc after work until it has cooled down. The sanding disc becomes very hot during operation.

4. CLEANING AND MAINTENANCE

• Unplug the tool from the mains before making any adjustments or performing any maintenance or repair operations, otherwise an electric shock may be produced.
• Do not use cleaning products or solvents. Chemicals can damage the plastic parts of the tool.
• Never clean the sander under running water.

PERFECTSURFACE 1000 STAND DISC

ENGLISH

WARNINGS:

• If any operation is required that is not indicated in this manual, please contact the official Cecotec Technical Support Service.
• Only use original parts.
• Allow the tool to cool down before performing any maintenance or cleaning operations, otherwise burns may result.

Cleaning

• Clean the appliance after each use.
• Clean the ventilation holes and the surface of the tool with a soft brush or cloth.
• Remove shavings, dust and dirt with a brush.

Transport

• Switch off the tool and unplug it from the mains.
• Allow the tool to cool down.
• Hold the tool with both hands when transporting it.

Maintenance

• This sander is maintenance free.
• Always check the sander before use as there may be loose, worn or damaged parts. Replace damaged parts.

Storage

Keep the tool in a cool, dry place and out of reach of children.

5. TECHNICAL SPECIFICATIONS

Product reference	EU01_100049
Appliance	PerfectSurface 1000 Stand Disc
Input nominal voltage (U)	230 V~, 50 Hz
Input power (P)	140 W (S6 30%)*
Energy consumption (P0)	100 W (S1)**
Idling speed (n0)	max. 3600 min-1
Weight (without accessories)	approx. 1.98 kg

ENGLISH

Protection	II
Sanding disc diameter	125 mm
Protection category	IPX0
Noise pressure level (LpA)	68.1 dB(A)KpA= 3 dB
Noise power level (LWA)	81.1 dB(A)KWA = 3 dB

* Operating mode S6 30%: continuous operation with intermittent charging (cycle time 10 min). In order not to overheat the motor, the motor may only run for 30% of the cycle time at the specified rated power and must then continue to run for 70% of the cycle time without load.

** Operating mode S1: continuous operation at constant load

• The specified total vibration value and the specified noise emission value have been measured according to a standardised test method and can be used to compare one power tool with another.
• The specified total vibration value and the specified noise emission value can also be used for a provisional assessment of the load.

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

PERFECTSURFACE 1000 STAND DISC

ENGLISH

7. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If you detect an incident with the appliance or have any queries, please contact the official Cecotec Technical Support Service on [phone].

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

9. DECLARATION OF CONFORMITY

MANUFACTURER: CECOTEC INNOVACIONES S.L

ADDRESS: Av. Reyes Católicos, N°60, 46910, Alfafar, Valencia (Spain).

DESCRIPTION: Sander

PRODUCT IDENTIFICATION: EU01_100049 PerfectSurface 1000 Stand Disc

FUNCTION: Disc sander

MODEL: EU01_100049

It certifies the appliance described has been designed, manufactured and tested and complies with all applicable provisions.

EU DIRECTIVES IMPLEMENTED:

Directive 2006/42/CE on machinery.

Directive 2014/30/EU on the harmonisation of the laws of the Member States relating to electromagnetic compatibility.

Directive 2011/65/EU and delegated directive 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

APPLICABLE HARMONISED NORMS:

ENGLISH

EN 62841-1:2015 + A11:2022

EN ISO 12100:2010

EN IEC 55014-1:2021

EN IEC 55014-2:2021

EN IEC 61000-3-2:2019 +A1:2021

EN 61000-3-3:2013 +A1:2019+A2:2021

PERFECTSURFACE 1000 STAND DISC

Fig./Img./Abb./Afb./Rys./Obr. 1

Fig./Img./Abb./Afb./Rys./Obr. 2

Fig./Img./Abb./Afb./Rys./Obr. 3

PERFECTSURFACE 1000 STAND DISC