YT-2357 - Paint gun Yato - Free user manual and instructions
Find the device manual for free YT-2357 Yato in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HVLP Air Spray Gun |
| Brand | Yato |
| Model | YT-2357 |
| Air Inlet | 1/4" (6.35 mm) NPT |
| Fluid Nozzle Size | 1.4 mm (suitable for thin to medium viscosity paints) |
| Operating Pressure | 30-50 PSI (2.0-3.5 bar) |
| Air Consumption | 4-8 CFM (113-227 L/min) |
| Fluid Cup Capacity | 600 ml (20 oz) gravity feed |
| Body Material | Aluminum alloy with anodized finish |
| Weight | 550 g (1.21 lb) |
| Spray Pattern | Adjustable: horizontal, vertical, and circular |
| Pattern Width | Up to 250 mm (10 in) depending on distance and pressure |
| Fluid Adjustment | Infinitely variable via control knob |
| Air Adjustment | Infinite air flow control with locking ring |
| Applications | Automotive, furniture, machinery, and general industrial painting |
| Cleaning | Disassemble and clean with solvent after each use |
| Maintenance | Lubricate moving parts and seals periodically |
| Safety | Use with respiratory protection and adequate ventilation |
| Spare Parts | Replacement nozzles, air caps, and cups available |
| Repairability | Modular design allow easy field disassembly |
Frequently Asked Questions - YT-2357 Yato
What air compressor is needed for the YT-2357?
The YT-2357 requires an air compressor that can supply 4-8 CFM at 30-50 PSI. A tank size of at least 25 liters is recommended for continuous spraying.
How do I thin paint for this spray gun?
Use a viscosity cup to adjust paint to around 20-25 seconds flow time. Stir thoroughly and filter the paint to remove particles before pouring into the cup.
How to clean the spray gun after use?
Empty the cup and run clean solvent through the gun. Disassemble the nozzle and air cap, soak in solvent, and wipe all parts. Reassemble and dry with clean air.
How do I adjust the spray pattern?
Turn the pattern control knob on the back of the gun to adjust between horizontal, vertical, and circular patterns. The fluid and air knobs control width and density.
Why is the spray gun spitting or sputtering?
Spitting is often caused by a loose cup lid, low fluid level, or a clogged fluid nozzle. Check that all parts are tight and clean, and ensure the paint is properly thinned.
What is the ideal spraying distance from the surface?
Hold the gun 15-25 cm (6-10 inches) from the surface. Move in a smooth, parallel stroke while keeping the gun perpendicular to avoid runs and uneven coverage.
Can I use water-based paints with the YT-2357?
Yes, the gun is compatible with water-based paints as long as they are filtered and thinned appropriately. Clean with water or a compatible solvent immediately after use.
How do I change the fluid nozzle?
Unscrew the air cap, then unscrew the fluid nozzle with the included wrench. Install the new nozzle and tighten securely, then reattach the air cap.
How often should I lubricate the spray gun?
Lubricate the air valve stem and trigger pivots with a light machine oil every 10-20 hours of use or when the trigger feels stiff.
What is the warranty on the Yato YT-2357?
Yato provides a 12-month warranty against manufacturing defects. Keep your purchase receipt and contact your dealer for service support.
User questions about YT-2357 Yato
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual YT-2357 - Yato and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YT-2357 by Yato.
USER MANUAL YT-2357 Yato
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Yato
Model : YT-2357
Category : Paint gun