What are the correct settings for the Yato YT-2340 spray gun?

Question

Accepted Answer

Here are the recommended settings to optimize your Yato YT-2340 spray gun:

Air pressure: 2.0 - 4.0 bar (do not exceed 4.5 bar). Use a lower pressure for fine paints and a higher pressure for thicker paints.
Spraying distance: 10-15 cm from the surface. This distance ensures even coverage and prevents drips.
Spray pattern: You can adjust the spray pattern by turning the cap to switch from a round pattern to a fan pattern as needed.
Nozzle diameter: 1.5 mm (standard setting).
Air consumption: 4-8 CFM (cubic feet per minute) under normal operation.
Application technique: Hold the gun perpendicular to the surface. Avoid circular movements that cause uneven coverage. Apply several thin coats rather than one thick coat.

These settings will help you achieve a professional result with your Yato YT-2340 spray gun.

User manual Yato Paint gun : user manuals and guides in PDF