PLEM 20 B5 - Measuring equipment PARKSIDE - Free user manual and instructions
Find the device manual for free PLEM 20 B5 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laser Distance Measurer |
| Model | PLEM 20 B5 |
| Measurement Range | Up to 20 meters (65.6 feet) |
| Measurement Accuracy | ± 2 mm (0.08 inches) |
| Laser Class | Class 2 Laser, < 1 mW power |
| Measurement Units | Meters (m), Feet/Inches (ft/in) |
| Measuring Functions | Distance, Area, Volume, Pythagorean (Indirect Height) |
| Continuous Measurement | Yes, for maximum/minimum tracking |
| Display | Backlit LCD with 4-digit precision |
| Power Source | 2 x 1.5V AAA batteries (not included) |
| Auto Power Off | Yes, after approximately 90 seconds |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Dimensions (approx.) | 115 × 45 × 25 mm (4.5 × 1.8 × 1.0 inches) |
| Weight (including batteries) | Approx. 110 g (3.9 oz) |
| Housing Material | ABS plastic with rubberized grip |
| Water/Dust Resistance | IP54 rated (splash-proof and dust-resistant) |
| Accessories Included | Carrying pouch, wrist strap, user manual |
| Maintenance and Cleaning | Clean lens with soft dry cloth; wipe housing with damp cloth; avoid solvents |
| Safety Warnings | Never stare into laser beam; avoid reflecting beam into eyes; keep away from children |
| Spare Parts and Repairability | Batteries replaceable; laser module not user-serviceable; contact authorized service |
Frequently Asked Questions - PLEM 20 B5 PARKSIDE
How do I measure a simple distance with the PLEM 20 B5?
Press the power button to activate the device. Point the laser at the target surface and press the measure button. The distance will appear on the display. The reference point is typically the bottom edge of the device.
What is the maximum range of this Parkside laser measurer?
The PLEM 20 B5 has a measurement range of up to 20 meters (65.6 feet). For best accuracy, use a tripod or stable surface and ensure the target has sufficient reflectivity.
How accurate is the PLEM 20 B5?
The device has an accuracy of ± 2 mm over the entire range. This is typical for laser distance meters and is suitable for most indoor renovation tasks.
Can I measure area and volume with this device?
Yes, the PLEM 20 B5 includes dedicated modes for area and volume. After selecting the mode, simply measure the required sides; the device calculates the result automatically.
What does the Pythagorean/mind function do?
The Pythagorean function allows you to calculate indirect height or length using right-angle geometry. Measure the hypotenuse and a horizontal leg to obtain the vertical distance.
How do I change the batteries?
Slide the battery compartment cover on the back of the device and insert two 1.5V AAA batteries with correct polarity. Replace the cover and ensure it clicks into place.
Can I use the device outdoors in bright sunlight?
Outdoor use is possible, but in bright sunlight the target reflection may be weak and reduce range. Use a target plate or shaded area for better performance.
How do I clean the laser lens?
Use only a soft, dry cloth to gently wipe the laser lens and sensor. Do not use water, cleaning agents, or compressed air, as they may damage the optics.
What safety precautions should I take?
Never look directly into the laser beam and avoid pointing it at people or animals. This is a Class 2 laser; however, it is still important to avoid eye exposure and to keep the device away from children.
Is the device shockproof or waterproof?
The PLEM 20 B5 has an IP54 rating, meaning it is protected against dust and splashing water. But it is not waterproof and should not be immersed. Avoid heavy drops to prevent damage.
What should I do if the display shows an error?
Error messages often appear if the target surface is too reflective or too dark. Try measuring on a different surface or clean the lens. If the problem persists, remove the batteries for 10 seconds and reinsert them.
How do I switch between meters and feet/inches?
Press and hold the unit button for approximately 2 seconds to cycle through available measurement units: meters, feet, and feet/inches. The current unit is shown on the display.
User questions about PLEM 20 B5 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual PLEM 20 B5 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLEM 20 B5 by PARKSIDE.
USER MANUAL PLEM 20 B5 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PLEM 20 B5
Category : Measuring equipment