PKLL 10 B5 - Measuring equipment PARKSIDE - Free user manual and instructions
Find the device manual for free PKLL 10 B5 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cross-line laser level |
| Brand | Parkside |
| Model | PKLL 10 B5 |
| Application | Interior construction and renovation work, aligning pictures, sockets, wall coverings |
| Measuring range | Up to 10 m (depending on ambient light) |
| Accuracy | ±0.2 mm/m (typical) |
| Laser class | Class 2 (EN 60825-1) |
| Wavelength | 650 nm (red) |
| Self-leveling range | Approx. ±4° |
| Leveling type | Automatic self-leveling with pendulum |
| Number of laser lines | 2 (horizontal and vertical) |
| Power supply | 2 x 1.5 V AA batteries |
| Battery life | Approx. 8 hours continuous operation |
| Tripod thread | 1/4 inch |
| Working temperature | 0 °C to 40 °C |
| Storage temperature | -20 °C to 70 °C |
| Dimensions (L x W x H) | Approx. 82 x 62 x 82 mm (with bracket) |
| Weight | Approx. 0.3 kg (incl. batteries and bracket) |
| Scope of delivery | Magnetic wall bracket, storage bag, operating instructions |
| Care and maintenance | Wipe with a soft, slightly damp cloth; never use solvents; clean the lens with a lint-free cloth. |
| Safety notice | Avoid eye contact with the laser beam; do not point at people or animals. |
| Spare parts and repairability | The device is not designed for user repair. Contact the Parkside service center for inspection or spare parts; use only original accessories and batteries. |
Frequently Asked Questions - PKLL 10 B5 PARKSIDE
How do I change the batteries on my Parkside PKLL 10 B5?
To change the batteries, locate the battery compartment on the bottom of the laser level. Slide the cover open, remove the old AA batteries, and insert two new ones, observing the correct polarity indicated inside. Close the cover securely before use. For optimal performance, use fresh alkaline batteries.
What does the self-leveling function do?
The self-leveling function automatically adjusts the laser lines to a perfectly horizontal or vertical position within a range of about ±4°. When the device is placed on a slightly uneven surface, the pendulum inside moves freely to compensate and the laser lines stabilize. If the surface is too tilted, the laser beam flashes as a warning that the device is outside its leveling range.
How can I mount the laser level on a wall?
The Parkside PKLL 10 B5 comes with a magnetic wall bracket. Attach the bracket to a ferromagnetic surface (like a metal stud or a steel plate) and place the laser level onto it. You can also screw the bracket to a wall using the provided holes, or use the integrated 1/4-inch tripod thread for standard camera tripods.
What is the laser range and accuracy?
The device projects visible red laser lines with a working range of up to 10 meters under normal lighting conditions. The accuracy is ±0.2 mm per meter, meaning that over a distance of 10 meters, the maximum deviation is 2 mm. For best results, use the laser detector (if available) for longer distances or in bright environments.
How do I switch between horizontal and vertical lines?
The PKLL 10 B5 operates with a two-line system. Usually, there is a switch or button on the side of the housing. Press it once to turn on both lines, press again to show only the horizontal line, press a third time for only the vertical line, and press again to turn off. Refer to the operating instructions for the exact sequence.
What does the flashing laser beam mean?
A flashing laser beam on this model indicates that the device is outside its self-leveling range or is not parked on a sufficiently horizontal surface. When this happens, the laser does not guarantee accurate results. Reposition the unit on a more level surface until the beam lights up steadily.
Is the laser level waterproof or dustproof?
The Parkside PKLL 10 B5 is not IP-rated for waterproofness or dustproofness. It is designed for indoor use in dry conditions. Avoid exposing the device to rain, moisture, or excessive dust. If the unit gets dirty, wipe it with a dry or slightly damp soft cloth. Do not immerse it in water.
How do I calibrate the laser level?
This laser level is factory calibrated and should not be calibrated by the user. However, you can perform a check by placing the device on a flat surface, projecting a line at a known reference point, then rotating it 180° to see if the line aligns again. If the deviation is excessive, contact the Parkside service center for accurate calibration.
Are spare parts available?
Spare parts such as the magnetic bracket or the battery cover may be available through Parkside customer service. However, internal components are not user-serviceable. If the device malfunctions, do not attempt to open it yourself. Contact the official service address provided in the manual to order replacement parts or get professional repair.
How do I clean the laser lens?
Use a soft, lint-free cloth to gently wipe the laser lens. If necessary, slightly dampen the cloth with water or a mild glass cleaner. Avoid any abrasive or solvent-based cleaners, as they can scratch the lens or damage the device. Always clean the lens only when the device is switched off.
User questions about PKLL 10 B5 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual PKLL 10 B5 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PKLL 10 B5 by PARKSIDE.
USER MANUAL PKLL 10 B5 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PKLL 10 B5
Category : Measuring equipment