Forcesilence 590 Freshessence - Ceiling fan CECOTEC - Free user manual and instructions

Brand	Cecotec
Model	Forcesilence 590 Freshessence
Product type	Floor-standing misting fan with wheeled base
Usage	Indoor, domestic use
Power supply	Mains, earthed plug
Speed adjustment	Speed button with multiple speeds
Oscillation	Yes, with oscillation button
Timer	Integrated, programmable automatic switch-off
Misting	Water tank with misting tube
Water tank	Transparent window for level control
Mist adjustment	Water mist regulator
Protective grilles	Front and rear grille, with ring closure system
Blades	Secured by safety cap
Mobility	Integrated wheels for easy movement
Safety	Base safety system, protective grilles
Maintenance	Regular cleaning of the tank and grilles
Installation	Simplified assembly, parts designed to fit together
Box contents	Misting fan, instruction manual
Warranty	Official Cecotec After-Sales Service
Recommended use	Spacious room, minimum distance of 20 cm from walls

Frequently Asked Questions - Forcesilence 590 Freshessence CECOTEC

How to assemble the fan?

To assemble the fan, start by fixing the base and the wheels. Then install the rear grille, the blades (aligning the groove with the motor shaft), then the front grille. Tighten the supplied caps and nuts. See the Appliance assembly section in the manual.

How to activate the misting function?

Fill the water tank (visible through the transparent window), then use the water mist regulator to adjust the misting intensity. The misting tube diffuses a fine refreshing mist.

How to adjust the fan speed?

Use the speed button located on the control panel. Several speeds are available to adapt the airflow to your needs.

Does the fan oscillate?

Yes, the fan has an oscillation button that automatically distributes air over a wide area.

How to use the timer?

The built-in timer allows you to program the fan to switch off automatically. Set the desired duration using the dedicated control on the control panel.

How to clean the fan?

Before cleaning, turn off and unplug the appliance. Clean the grilles and water tank with a damp cloth. Never immerse the motor or cable in water.

Can I use this fan outdoors?

No, this fan is designed for indoor use only. Do not use it in humid environments or exposed to weather.

What to do if the power cable is damaged?

If the cable shows visible damage, do not use the appliance. Contact the official Cecotec After-Sales Service immediately to have it replaced, to avoid any danger.

How to maintain the water tank?

Empty the tank after each use, rinse it with clean water and let it dry before reinstalling it. Avoid abrasive products that could damage the tank.

What is the warranty on this product?

Cecotec offers a warranty service through its official After-Sales Service. Keep your purchase receipt and manual for any claim.

USER MANUAL Forcesilence 590 Freshessence CECOTEC

1. Parts and components 29
2. Before use 30
3. Product assembly 30
4. Operation 31
5. Cleaning and maintenance 31
6. Technical specifications 32
7. Disposal of old electrical and electronic appliances 33
8. Technical support and warranty 33
9. Copyright 33

SOMMAIRE

Read these instructions thoroughly before using the product. Keep this instruction manual for future reference or new users. All safety instructions must be closely followed when using the appliance.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.
• Supervise children to prevent them from playing with the appliance. Close supervision is necessary when the appliance is being used by or near children.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• Unplug the appliance from the mains when filling up and cleaning the water tank.
• Make sure that the mains voltage matches the voltage stated on the product marking and that the wall outlet is grounded.
• Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid. Do not expose the electrical connections to water. Make sure your hands are

dry before handling the plug or switching on the appliance.

• Never immerse the appliance in water. Do not touch the water!
• Check the power cord regularly for visible damage. If the cord is damaged, it must be repaired by the official Technical Support Service of Cecotec to avoid any type of danger.
• Do not move the product or pull from its power cord. Do not use the power cord as handle. Do not push the cord against corners or sharp edges. Do not pass the product over the power cord. Keep the cord away from hot surfaces.
• Do not operate the product if its cord, plug, or body show visible damage, do not operate properly, or have been dropped.
• Do not use the appliance in confined spaces with explosive or flammable vapours.
• Keep the fan away from heat sources.
• Keep hair, clothes, fingers, and other body parts away from openings and moving parts of the product.
• Do not leave the appliance unattended while in use. Unplug it from the power supply when you finish using it and before leaving the room.
• Do not try to repair the product by yourself. Contact the official Technical Support Service of Cecotec.
• Always turn off and unplug the appliance when not in use, before moving it to a new location, and before assembling or disassembling it. To avoid tripping hazards, wind the cord safely.
• Make sure the fan is not placed close to curtains or other objects it may become entangled with.
• Do not place the cord beneath the carpet or cover it. Place the appliance in a room with no obstacles and where it cannot be tipped over.

- Operate the fan in a wide area. No less than 20 cm should be kept from walls and corners to ensure proper air ventilation during operation.

INSTRUCTIONS DE SÉCURITÉ

1. Decoration ring
2. Front grille
3. Screw
4. Fan-blade fixing cap
5. Blades
6. Safety fixing nut
7. Protective back grille
8. Motor
9. Motor front cover
10. Motor rear cover
11. Oscillation button
12. Connector
13. Connector bracket
14. Support bar
15. Screw pin
16. Main-body rear housing
17. Water tank
18. Water lock
19. Base
20. Base lock
21. Caster
22. Grille fastening ring
23. Mist tube
24. Control panel
25. Timer
26. Speed button
27. Water mist regulator
28. Main-body front housing
29. Transparent window

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If any of them are missing or not in good condition, please contact the official Cecotec Technical Support Service immediately.

Box contents

• EnergySilence 590 FreshEssence mist fan
• Instruction manual

3. PRODUCT ASSEMBLY

Assembling the fan base

• The fan base has been boxed unassembled to minimise packaging waste. Each part is designed to fit together and be disassembled easily for cleaning or storage.
• Turn the fan-blade fixing cap (4) clockwise and the back-grille fixing nut (6) anticlockwise and remove these two parts.
• Assemble the back grille so that the handle is facing upward.
• Screw the back-grille nut and make sure the grille is properly fixed.
• Assemble the blades onto the shaft until they fit with the back-grille fixing nut.
• Tighten the fan-blade fixing cap onto the shaft anticlockwise.
• Put the back and front grilles together. Make sure that the holes on each one match perfectly and use the closing clips to keep them safely attached.
• Do not force neither the cap nor the fixing nut.

Fig. 2

• To make sure proper installation was achieved, the centre of the fan blade should align with the T-bar on the motor shaft.
• Fix the blades by screwing the fixing nut anti-clockwise at the end of the motor shaft. Do not over-tighten the nut.

Fig. 3

Open all the locking clips on the front safety grille.

Assembling the water tank-humidifier

Take out the water tank first, and then take out the body valve's cover from water tank. Then, pour water into the tank and tighten the body valve's cover. Place the tank inside the mist fan's

main body. Make sure that the water temperature does not exceed 40\ °C .

Fig. 4

4. OPERATION

Fig. 5

1. On/Off
2. Speed control button
3. Mist fan

Manual control panel

• Always operate the product on a flat, level, steady, and stable surface to prevent it from tipping over.
• Plug the product into a standard electrical outlet.
• To turn the fan on, rotate the ON/OFF/TIMER knob to the ON position and press the speed-control button to select: 0-Off, 1-Low, 2-Medium, 3-High.
• To turn the fan off, rotate the ON/OFF/TIMER knob to the OFF position.
• To set the fan timer, rotate the ON/OFF/TIMER knob to the desired operating time (in minutes). Then, select the desired level of mist. The fan will turn off after time has elapsed.

WARNING: press only one of the speed-control buttons at a time. Permanent damage to the switch housing may occur if two or more of the buttons are pressed simultaneously.

Unwind and straighten the cord before operation. The fan and motor assembly are attached to a 2-position knob. Tilt up or down until the assembly clicks into the desired position.

Fig. 6

5. CLEANING AND MAINTENANCE

• Always disconnect electrical and electronic appliances before cleaning them.
• Never spray with liquids or submerge the appliance in water or any other liquid.
• Do not fill the water tank with water over 40 °C to avoid discoloration or deformation.
• Pour out water from the tank when water temperature is below 0 °C to prevent water from freezing and avoid damage to parts.

Cleaning the water dispenser

If the tanks is dirty, use a soft cloth with cleaning agent to clean it. Then, use a new, clean, wet cloth to remove any cleaning agent remains.

Water tank cleaning

First, turn off and disconnect the appliance. Remove the water tank and pull from the mist tube. Clean it if it is dirty. Use a dampened cloth to clean the mist fan cover.

6. TECHNICAL SPECIFICATIONS

Model: EnergySilence 590 Freshessence

Product reference: 05952

90 W, 220-240 V\~50 Hz

Class II

Description	Symbol	Value	Unit
Fan maximum flow	F	45.0	m3/min
Fan power consumption	P	39.6	W
Service value	SV	1.1	(m3/min)/W
Energy consumption in off mode	POFF	0.0	W
Fan sound power level	LWA	60	dB (A)
Maximum air speed	C	3.1	m/seg
Service value measurement standard	IEC 60879
Contact details to obtain more information	Cecotec Innovaciones SL.C/ de la Pinadeta s/n, 46930Quart de Poblet, Valencia (Spain)

Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or cells must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec's official Technical Support Service at [phone].

9. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Img. 1

Fig./Img./Abb./Rys./Obr.1

Fig./Img./Abb./Rys./Obr. 2

Fig./Img./Abb./Rys./Obr. 3

Fig./Img./Abb./Rys./Obr. 4

Fig./Img./Abb./Rys./Obr. 6
Fig./Img./Abb./Rys./Obr. 5

www.cecotec.es