ManualGo.com 
5885 - Circular saw SKIL - Free user manual and instructions
Find the device manual for free 5885 SKIL in PDF.
Download the instructions for your Circular saw in PDF format for free! Find your manual 5885 - SKIL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5885 by SKIL.
USER MANUAL 5885 SKIL
using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
- the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level
! protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns
MAINTENANCE / SERVICE
Always keep tool and cord clean (especially the ventilation slots)
! disconnect the plug before cleaning
- Clean saw blade immediately after use (especially from resin and glue)
- If the tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for SKIL power tools
- send the tool undismantled together with proof of purchase to your dealer or the nearest SKIL service station (addresses as well as the service diagram of the tool are listed on www.skileurope.com)
ENVIRONMENT
-
Do not dispose of electric tools, accessories and packaging together with household waste material (only for EU countries)
-
in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility
symbol 14 will remind you of this when the need for disposing occurs
Scie circulaire
5885
INTRODUCTION
CE DELARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 60 745, EN 55 014, in accordance with the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC (until Dec. 28, 2009), 2006/42/EC (from Dec. 29, 2009 on).
NOISE/VIBRATION Measured in accordance with EN 60 745 the sound pressure level of this tool is 94 dB(A) and the sound power level 105dB(A) (standard deviation: 3 dB), and the vibration 2.9~m / s^2 (hand-arm method; uncertainty K = 1.5m / s^2 ).
Technical file at: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
