Ghibli & Wirbel

REXA 50 D 55 CHEM - Floor cleaner Ghibli & Wirbel - Free user manual and instructions

Find the device manual for free REXA 50 D 55 CHEM Ghibli & Wirbel in PDF.

📄 296 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Ghibli & Wirbel REXA 50 D 55 CHEM - page 36
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Floor scrubber (autoscrubber)
Brand Ghibli & Wirbel
Model REXA 50 D 55 CHEM
Working width 50 cm
Solution tank capacity 55 L
Recovery tank capacity 55 L
Weight 210 kg (estimated)
Dimensions (L × W × H) 1300 × 600 × 1100 mm (estimated)
Power supply Electric battery
Battery voltage 24 V
Runtime 3 hours (estimated)
Battery type Maintenance-free lead-acid
Drive system Self-propelled
Forward speed 4 km/h (estimated)
Maximum slope 5% (estimated)
Noise level 68 dB(A) (estimated)
Chassis material High-density polyethylene and stainless steel
Maintenance and cleaning Regular cleaning of tanks, brushes, and squeegees
Safety Emergency stop, brush protection, audible alarm
Spare parts and repairability Brushes, squeegees, filters, batteries, and seals available
General information Professional cleaner for smooth and semi-rough floors

Frequently Asked Questions - REXA 50 D 55 CHEM Ghibli & Wirbel

What is the solution tank capacity?
The solution tank has a capacity of 55 liters, i.e. 55 L of water and detergent.
How to clean the tanks after use?
After each use, empty the dirty water tank and rinse it with clean water. Also clean the solution tank with a damp cloth, then let it dry.
What battery voltage is required?
The device operates with a 24 V battery. Use a charger suitable for this voltage to recharge the battery.
Can this cleaner be used on all types of floors?
This model is designed for smooth or semi-rough surfaces such as tile, concrete, marble, PVC, or epoxy. Avoid highly porous floors or water-sensitive surfaces.
How to replace the brushes?
Lift the machine to access the brushes, remove the fastening device, take out the worn brushes, then install new ones. Make sure the brushes are securely attached before resuming work.
What to do if the cleaner no longer sucks up water?
First check that the float in the dirty water tank is not blocked, then inspect the suction hoses and the squeegee. A blockage or a damaged seal can prevent suction.
What is the approximate runtime of the machine?
The runtime is approximately 3 hours under normal use, depending on the floor type and the amount of detergent used.
What safety precautions should be observed?
Wear protective equipment (gloves, safety shoes), cut off the power before any intervention, and use the emergency stop in case of a problem. Never point the jet at people or animals.
Where to find spare parts for the REXA 50 D 55 CHEM?
Spare parts such as brushes, squeegees, filters, and seals are available from authorized Ghibli & Wirbel dealers or through specialized platforms for floor cleaner spare parts.
How to maintain the squeegee?
Regularly check the condition of the rubber lips and replace them if worn. Clean the squeegees after each use and adjust the contact height with the floor for optimal drying.

User questions about REXA 50 D 55 CHEM Ghibli & Wirbel

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Floor cleaner in PDF format for free! Find your manual REXA 50 D 55 CHEM - Ghibli & Wirbel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REXA 50 D 55 CHEM by Ghibli & Wirbel.

USER MANUAL REXA 50 D 55 CHEM Ghibli & Wirbel

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Ghibli & Wirbel

Model : REXA 50 D 55 CHEM

Category : Floor cleaner