Ghibli & Wirbel

O 143 U13 - Floor cleaner Ghibli & Wirbel - Free user manual and instructions

Find the device manual for free O 143 U13 Ghibli & Wirbel in PDF.

📄 124 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Ghibli & Wirbel O 143 U13 - page 25
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Single-brush floor scrubber
Brand Ghibli & Wirbel
Model O 143 U13
Dimensions (L x W x H) 45 x 43 x 30 cm
Weight 15 kg
Power supply Electric 230 V / 50 Hz
Power 800 W
Brush diameter 43 cm
Rotation speed 150 rpm
Water tank 5 L
Solution tank 5 L
Power cord 15 m
Noise level 60 dB(A)
Materials Stainless steel, reinforced plastic
Main functions Washing, brushing, dirty water recovery
Maintenance Clean brushes after each use, check filters
Safety Emergency stop, overflow protection
Spare parts available Brushes, pads, filters, seals
Included accessories Standard brush, wash pad, ergonomic handle
Warranty 1 year

Frequently Asked Questions - O 143 U13 Ghibli & Wirbel

How to use the floor scrubber O 143 U13?
Fill the water tank with the appropriate detergent, plug in the device, adjust the brush height according to the floor, then move forward in a straight line. Release the handle to stop.
What type of detergent to use?
Use a diluted neutral floor detergent suitable for single-brush machines. Avoid acidic or abrasive products.
How to maintain the brushes?
After each use, remove the brush and clean it with clean water. Let it air dry before reassembling.
What to do in case of loss of suction?
Check the dirty water tank (full), clean the suction filter, and ensure the hose is not blocked.
Is the power cord removable?
No, the cord is fixed. Store it coiled on the provided hooks.
Can I use the device on all types of floors?
Yes, it is suitable for tiles, hard floors, and short-pile carpets. For parquet floors, check residual moisture.
How to empty the dirty water tank?
Unplug the device, remove the tank, pour the dirty water into a drain, rinse, and put back in place.
Is there a filter to clean?
Yes, a foam filter protects the motor. Clean it every 10 uses with soapy water, let dry.
How to store the device after use?
Empty the tanks, clean the brush, coil the cord, and place the device upright in a dry place.
Where to find spare parts?
Contact Ghibli & Wirbel customer service or check the spare parts section on their official website.

User questions about O 143 U13 Ghibli & Wirbel

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Floor cleaner in PDF format for free! Find your manual O 143 U13 - Ghibli & Wirbel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. O 143 U13 by Ghibli & Wirbel.

USER MANUAL O 143 U13 Ghibli & Wirbel

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Ghibli & Wirbel

Model : O 143 U13

Category : Floor cleaner