REXA 50 SD 55 BC - Floor cleaner Ghibli & Wirbel - Free user manual and instructions
Find the device manual for free REXA 50 SD 55 BC Ghibli & Wirbel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floor Scrubber |
| Brand | Ghibli & Wirbel |
| Model | REXA 50 SD 55 BC |
| Scrubbing Width | 50 cm |
| Solution Tank Capacity | 50 L |
| Recovery Tank Capacity | 55 L |
| Dimensions (L x W x H) | 1200 x 600 x 1000 mm |
| Weight | 150 kg |
| Battery Voltage | 24 V |
| Battery Type | Lead-acid (wet) |
| Runtime | 3-4 hours |
| Brush Motor Power | 500 W |
| Vacuum Motor Power | 400 W |
| Drive System | Self-propelled |
| Maximum Speed | 5 km/h |
| Noise Level | 70 dB(A) |
| Squeegee Width | 75 cm |
| Brush Diameter | 50 cm |
| Brush Speed | 150 rpm |
| Solution Flow Control | Adjustable |
| Included Accessories | Brush, squeegee, battery charger |
| Maintenance | Daily emptying tanks, weekly brush inspection, monthly battery check |
| Safety Features | Emergency stop, key switch, low battery indicator |
| Repairability | Replaceable brushes, squeegees, filters; parts available |
Frequently Asked Questions - REXA 50 SD 55 BC Ghibli & Wirbel
How do I start the floor scrubber?
Ensure the battery is charged, fill the solution tank, then turn the key switch to ON and press the green start button. The machine will begin scrubbing.
What type of cleaning solution should I use?
Use a low-foaming floor cleaner suitable for automatic scrubbers. Do not use highly acidic or alkaline solutions.
How often should I change the brush?
Inspect the brush regularly. Replace it when bristles are worn down to the base or after approximately 200 hours of use.
Why is the machine not picking up water?
Check the squeegee for damage or debris, ensure the vacuum motor is on, and verify that the recovery tank is not full and the drain hose is properly closed.
How do I charge the battery?
Connect the charger to the battery connector and to a suitable mains outlet. Charge for 8-12 hours. Avoid discharging below 20%.
What is the maximum slope the machine can handle?
The machine can handle slopes up to 2% (2 cm per meter) for safe operation. Do not use on steeper inclines.
How do I clean the recovery tank?
Empty the tank after each use. Rinse with water and a mild detergent. Remove the filter and clean it separately. Allow to dry before storing.
What does the low battery alarm mean?
The alarm indicates that the battery voltage is low and the machine will shut down soon. Return to the charging station and charge immediately.
Can I use the machine on carpet?
No, this machine is designed for hard floors only. Using it on carpet can damage the brush and vacuum system.
How do I transport the machine?
Turn off the machine, remove the key, and drain all tanks. Use a ramp or lift to load onto a truck. Secure the machine with straps.
User questions about REXA 50 SD 55 BC Ghibli & Wirbel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Floor cleaner in PDF format for free! Find your manual REXA 50 SD 55 BC - Ghibli & Wirbel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REXA 50 SD 55 BC by Ghibli & Wirbel.
USER MANUAL REXA 50 SD 55 BC Ghibli & Wirbel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ghibli & Wirbel
Model : REXA 50 SD 55 BC
Category : Floor cleaner