MD 8000.1 - Receiver Taramp’s - Free user manual and instructions
Find the device manual for free MD 8000.1 Taramp’s in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monoblock Car Audio Amplifier |
| Dimensions (L × W × H) | Approx. 310 × 183 × 51 mm |
| Weight | Approx. 1.0 kg |
| Power Supply | 12 V DC (10–15 V) |
| Output Power (RMS) | 4000 W @ 1 Ω / 2000 W @ 2 Ω / 1000 W @ 4 Ω |
| Amplifier Class | Class D |
| Minimum Impedance | 1 Ω |
| Low-Pass Filter | Yes, adjustable 40–250 Hz |
| Subsonic Filter | Yes, adjustable 8–50 Hz |
| Bass Boost | Yes, 0–9 dB |
| Compatibility | Car audio systems with 1, 2, or 4 Ω subwoofers |
| Installation | Professional installation recommended |
| Care and Cleaning | Wipe with dry cloth; avoid moisture and solvents |
| Safety | Thermal and short-circuit protection |
| Spare Parts and Repairability | Replacement fuses and remote control; authorized service |
| General Information | Taramp’s MD 8000.1 supplied with remote control and mounting kit |
Frequently Asked Questions - MD 8000.1 Taramp’s
What is the RMS power output of the Taramp’s MD 8000.1?
The Taramp’s MD 8000.1 delivers 4000 W RMS at 1 Ω, 2000 W RMS at 2 Ω, and 1000 W RMS at 4 Ω.
Can this amplifier work with a 4-ohm subwoofer?
Yes, the MD 8000.1 is stable at 4 Ω and will output 1000 W RMS in that configuration.
What is the minimum impedance for the MD 8000.1?
The minimum impedance is 1 Ω. Do not go below 1 Ω to prevent the protection circuits from engaging.
Does the amplifier include a remote control?
Yes, the package includes a wired remote control for adjusting the bass level from the front of the vehicle.
What fuse size is recommended for the MD 8000.1?
A 200 A fuse is recommended for the power wire. Always install the fuse within 18 inches of the battery.
What is the frequency response of this amplifier?
The frequency response is 8 Hz to 250 Hz, making it ideal for feeding subwoofers.
How should I connect the power and ground wires?
Use high-quality copper cables: 1/0 gauge for power and ground. Connect ground directly to the chassis, less than 0.5 meters from the amplifier.
Does the MD 8000.1 have thermal protection?
Yes, the thermal protection circuit shuts down the amplifier if the heat sink exceeds a safe temperature, protecting the internal components.
Can I bridge this amplifier to another amp?
No, the MD 8000.1 is a monoblock amplifier. It is not designed to be bridged; you can connect multiple subwoofers to its single channel.
What alternator output is recommended for this amplifier?
For full power, a high-output alternator (≥ 240 A) and an additional battery are recommended to meet the current demand.
User questions about MD 8000.1 Taramp’s
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MD 8000.1 - Taramp’s and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MD 8000.1 by Taramp’s.
USER MANUAL MD 8000.1 Taramp’s
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taramp’s
Model : MD 8000.1
Category : Receiver