HD 2000 - Receiver Taramp’s - Free user manual and instructions
Find the device manual for free HD 2000 Taramp’s in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Car Audio Receiver |
| Brand | Taramp's |
| Model | HD 2000 |
| Power Output (RMS) | 4 x 50 Watts (4 channels) |
| Peak Power | Max 200 Watts |
| Number of Channels | 4 |
| Impedance | 4-8 Ohms (per channel) |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | ≥ 80 dB |
| Input Sensitivity | 200 mV - 4 V |
| Dimensions (W x H x D) | 178 x 50 x 160 mm (1 DIN) |
| Weight | 1.2 kg |
| Power Supply Voltage | 12 V DC (car battery) |
| Main Functions | AM/FM tuner, USB/SD playback, Bluetooth, AUX input, remote control |
| Care and Cleaning | Wipe with a dry cloth; avoid liquids and abrasives |
| Safety | Do not expose to moisture; ensure proper ventilation; disconnect battery when wiring |
| Spare Parts and Repairability | Contact authorized service center; user-replaceable fuses only |
| General Information | Designed for 12V negative ground systems; includes mounting bracket and wiring harness |
Frequently Asked Questions - HD 2000 Taramp’s
How do I install the HD 2000 receiver in my car?
Disconnect the car battery negative terminal. Connect the wiring harness accordingly: yellow for constant 12V, red for ignition, black for ground, and speaker wires. Mount the receiver using the provided brackets. Reconnect battery and test.
Can I use this receiver with a subwoofer?
Yes, the HD 2000 has RCA preamp outputs that can be connected to an external amplifier for a subwoofer.
What audio formats are supported via USB/SD?
It supports MP3, WMA, and WAV files. The maximum USB/SD capacity is 32 GB formatted in FAT32.
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone, search for devices, and select 'HD 2000' from the list. If prompted, enter PIN 0000. The receiver will store up to 5 paired devices.
Why is there no sound from the speakers?
Check that the receiver is turned on and the volume is not muted. Verify speaker connections and fuses. Ensure the car ignition is on for the remote wire. If using an external amp, check its power.
How do I reset the receiver to factory settings?
Press and hold the reset button (located on the front panel or behind the faceplate) for about 5 seconds using a pointed object. This will clear all settings and paired devices.
Can I control the receiver with a remote?
Yes, the HD 2000 comes with an IR remote control. Aim it at the receiver's IR sensor. Replace the battery if it stops working.
What is the recommended fuse rating?
Use a 10A mini blade fuse in the power wire near the battery. Never replace with a higher rating.
How do I clean the receiver?
Wipe the front panel and display with a soft, dry microfiber cloth. Do not use any chemical cleaners or water. For tough dirt, slightly dampen the cloth with water.
Where can I find the user manual?
You can download the PDF manual from notice-facile.com for free. It contains detailed wiring diagrams and specifications.
User questions about HD 2000 Taramp’s
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HD 2000 - Taramp’s and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HD 2000 by Taramp’s.
USER MANUAL HD 2000 Taramp’s
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taramp’s
Model : HD 2000
Category : Receiver