BASS 1200 - Receiver Taramp’s - Free user manual and instructions
Find the device manual for free BASS 1200 Taramp’s in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Receiver |
| Brand | Taramp’s |
| Model | BASS 1200 |
| Dimensions (W x H x D) | 178 x 100 x 150 mm (2-DIN) |
| Weight | 1.2 kg |
| Power Supply | 12V DC (negative ground) |
| Maximum Power Output | 1200W peak |
| RMS Power Output | 4 x 50W @ 4 ohms or 2 x 100W @ 2 ohms |
| Subwoofer Output | 1 channel, 300W RMS @ 2 ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| FM Tuner | 87.5 - 108 MHz, 30 presets |
| Bluetooth | Version 4.0, A2DP, AVRCP |
| USB Playback | MP3, WMA, WAV files |
| AUX Input | 3.5 mm stereo jack |
| Equalizer | 7-band graphic equalizer |
| Remote Control | Included IR remote |
| Maintenance | Clean with dry microfiber cloth; avoid liquids |
| Safety | Use correct fuse rating; disconnect battery during installation |
| Spare Parts & Repairability | Contact Taramp’s service center for replacement parts |
Frequently Asked Questions - BASS 1200 Taramp’s
How do I reset the BASS 1200 receiver?
Press and hold the Reset button (located on the front panel) for 3 seconds using a paperclip. This restores factory settings.
How to pair a Bluetooth device?
Enable Bluetooth on your phone, search for Taramp's BASS 1200, and select it. The receiver will ask for a PIN: enter 0000 or 1234.
What to do if there is no sound?
Check that the receiver is not muted, volume is up, and source is selected. Verify speaker connections and that the correct speaker impedance is used (4-8 ohms).
Can I use this receiver with a subwoofer?
Yes, the BASS 1200 has a dedicated subwoofer output (RCA) that can drive an external amplifier. It also has a built-in subwoofer channel with 300W RMS power.
What is the fuse rating for the receiver?
The receiver uses a 30A blade fuse. Always replace with the same rating to avoid damage.
How do I set the clock?
Press the Menu button, navigate to Clock settings using the volume knob, then adjust hour and minute using the knob or remote.
Does the receiver support steering wheel controls?
Yes, it has a SWC input. You need an adapter (sold separately) compatible with your vehicle's steering wheel control system.
What audio formats are supported via USB?
The USB port supports MP3, WMA, and WAV files. For best compatibility, use a USB drive formatted as FAT32.
How do I clean the front panel?
Wipe gently with a dry, soft microfiber cloth. Do not use alcohol, ammonia, or abrasive cleaners.
Why does the receiver turn off automatically?
This may be due to the Auto Power Off feature. Go to the settings menu and disable it if you prefer manual control.
User questions about BASS 1200 Taramp’s
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual BASS 1200 - Taramp’s and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BASS 1200 by Taramp’s.
USER MANUAL BASS 1200 Taramp’s
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taramp’s
Model : BASS 1200
Category : Receiver