NATTBAD 506.048.75 - Loudspeaker IKEA - Free user manual and instructions
Find the device manual for free NATTBAD 506.048.75 IKEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Bluetooth loudspeaker |
| Brand | IKEA |
| Model | NATTBAD 506.048.75 |
| Dimensions | Approx. 8.5 × 8.5 × 4.5 cm (W × D × H) |
| Weight | 0.21 kg |
| Power Supply | Built-in rechargeable lithium-ion battery, 3.7 V, 1500 mAh |
| Battery Life | Up to 10 hours at moderate volume |
| Charging | USB-C, 5 V / 1.5 A, full charge in about 3 hours |
| Connectivity | Bluetooth 4.2, range up to 10 m |
| Main Functions | Play/pause, volume control, audio streaming, hands-free calls |
| Built-in Microphone | Yes, for speakerphone conversations |
| Water Resistance | IPX5 – protected against water splashes |
| Frequency Response | 100 Hz – 20 kHz |
| Output Power | 5 W RMS |
| In The Box | NATTBAD speaker, USB-C cable, quick start guide, safety manual |
| Cleaning and Maintenance | Wipe with a soft, damp cloth; avoid abrasive cleaners and immersion |
| Safety Warnings | Keep away from open flames; do not disassemble; only use approved charger |
| Spare Parts and Repairability | Replacement parts available via IKEA customer service; fully serviceable |
| General Information | Suitable for indoor and bathroom use; Bluetooth LED indicator |
Frequently Asked Questions - NATTBAD 506.048.75 IKEA
How do I pair the NATTBAD speaker with my phone?
Turn on the speaker by pressing the power button. Then hold the Bluetooth button until the LED flashes. On your phone, enable Bluetooth and select NATTBAD from the available devices. If prompted, enter PIN 0000.
How do I charge the NATTBAD speaker?
Connect the supplied USB-C cable to the speaker and a 5V/1.5A power adapter. The LED indicator will show the charging status. A full charge takes approximately 3 hours.
Is the speaker waterproof?
Yes, the NATTBAD has an IPX5 rating, meaning it withstands water splashes. It is suitable for use in the bathroom, but should never be submerged in water.
How long does the battery last?
With a full charge, the speaker provides up to 10 hours of playtime at moderate volume. Higher volume and continuous calls may shorten battery life.
Can I answer phone calls with the speaker?
Yes, the built-in microphone allows hands-free calls. Press the call button to answer or reject an incoming call, and press again to end the call.
How do I reset the speaker when it stops responding?
Turn the speaker off and on again. If that doesn't work, charge it for at least 20 minutes and retry. This restores the Bluetooth connection and clears temporary glitches.
How should I clean the NATTBAD speaker?
Use a soft, dry cloth to wipe the outer surface. For stubborn marks, use a slightly damp cloth with mild soap. Never use abrasive cleaners or immerse the speaker in water.
Can I connect two speakers for stereo sound?
If your device supports wireless stereo pairing, press the Bluetooth button on both speakers simultaneously. Check the user manual for the exact pairing sequence.
What is the Bluetooth range?
The wireless range is approximately 10 meters in an open space. Walls, furniture, and other obstacles may reduce the effective range.
Is the speaker compatible with all smartphones?
The NATTBAD works with most devices that support Bluetooth A2DP, including Android and iOS phones, tablets, and computers. Check your device's compatibility before use.
User questions about NATTBAD 506.048.75 IKEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual NATTBAD 506.048.75 - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NATTBAD 506.048.75 by IKEA.