NATTBAD 706.048.55 - Loudspeaker IKEA - Free user manual and instructions
Find the device manual for free NATTBAD 706.048.55 IKEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Speaker |
| Brand | IKEA |
| Model | NATTBAD 706.048.55 |
| Power Source | Rechargeable lithium-ion battery |
| Battery Life | Up to 10 hours (depending on volume) |
| Charging Time | Approximately 4 hours |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | Up to 10 metres |
| Output Power | 5 W RMS |
| Frequency Response | 100 Hz - 20 kHz |
| Water Resistance | IPX4 splash-proof |
| Dimensions (H x W x D) | 150 x 80 x 80 mm |
| Weight | 0.6 kg |
| Controls | Power, Play/Pause, Volume +/-, Bluetooth |
| Built-in Microphone | Yes, for hands-free calls |
| Mounting | Free-standing or hangable with strap |
| Cleaning Instructions | Wipe with a soft dry cloth; avoid harsh chemicals |
| Safety Information | Do not submerge; keep away from children under 3 due to small parts |
| Spare Parts | Not user-replaceable; contact IKEA service |
| Repairability | Non-serviceable; dispose as electronic waste |
Frequently Asked Questions - NATTBAD 706.048.55 IKEA
How do I pair the NATTBAD with my phone?
Turn on the speaker and press the Bluetooth button to enter pairing mode (the indicator flashes blue and red). On your phone, go to Bluetooth settings and select NATTBAD 706.048.55.
Is the NATTBAD loudspeaker waterproof?
Yes, it has IPX4 splash-proof protection, so it can handle light water splashes. However, do not submerge it or use it in heavy rain.
How long does it take to charge the speaker?
A full charge via USB-C takes about 4 hours. The battery lasts up to 10 hours at moderate volume.
What should I do if the speaker doesn't turn on?
First, connect the charger and wait 15 minutes. If still not working, press and hold the power button for 10 seconds to reset. If the issue remains, contact IKEA support.
Can I use the speaker for hands-free calls?
Yes, the built-in microphone lets you answer calls by pressing the play/pause button. Press again to end the call.
How do I reset the speaker to factory settings?
With the speaker off, press and hold Volume + and Power simultaneously for 5 seconds. A beep indicates a successful reset, clearing all paired devices.
What is the Bluetooth range?
Using Bluetooth 5.0, the range is up to 10 metres (33 feet) in an open area without obstacles.
Can I pair two speakers for stereo sound?
This model does not support stereo pairing. It is designed to operate as a single speaker.
How should I clean and maintain the speaker?
Wipe the surface with a soft, dry cloth. Do not use abrasive materials or chemical cleaners. Keep the ports free of dust and moisture.
Is there a voice assistant built-in?
No, the speaker does not have a built-in voice assistant. It works purely via Bluetooth audio and supports calls via microphone.
User questions about NATTBAD 706.048.55 IKEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual NATTBAD 706.048.55 - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NATTBAD 706.048.55 by IKEA.
USER MANUAL NATTBAD 706.048.55 IKEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IKEA
Model : NATTBAD 706.048.55
Category : Loudspeaker