EKN90SS - Range hood CDA - Free user manual and instructions
Find the device manual for free EKN90SS CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted chimney range hood |
| Finish | Stainless steel |
| Width | 900 mm |
| Depth | 500 mm |
| Height Range | 600-1180 mm adjustable |
| Extraction Type | Ducted, with optional recirculation kit |
| Maximum Extraction Rate | 650 m³/h |
| Number of Speeds | 4 including boost |
| Control Type | Push button |
| Lighting | LED |
| Grease Filters | Multi-layer aluminium mesh |
| Motor | Single high performance motor |
| Noise Level | Up to 65 dB(A) |
| Power Consumption | 270 W |
| Power Supply | 220-240 V, 50 Hz |
| Duct Diameter | 150 mm |
| Minimum Mounting Height | 600 mm above electric hob, 700 mm above gas hob |
| Cleaning | Wash filters monthly with warm water and neutral detergent; wipe surfaces with damp cloth |
| Safety Features | Thermal overload protection and tamper-resistant fixing |
| Spare Parts | Replaceable filters, LED modules and motor available from CDA service |
| Manual | 20-page user manual supplied, free PDF download available at notice-facile.com |
Frequently Asked Questions - EKN90SS CDA
How do I clean the stainless steel finish?
Wipe with a soft damp cloth and a mild detergent. Avoid abrasive pads or chlorine-based products, and dry with a clean cloth to prevent streaks.
How often should the carbon filter be changed if using recirculation mode?
We recommend changing the activated carbon filter every 3-6 months, depending on cooking frequency, when the hood is used in recirculation mode.
What height should the hood be mounted above the hob?
The minimum distance is 600 mm above an electric hob and 700 mm above a gas hob to ensure safe operation.
Can this range hood be used with an outside duct?
Yes, the EKN90SS is designed for ducted extraction. Connect the outlet to a 150 mm duct, and if required, keep the duct as short as possible for best performance.
Why does my hood seem noisy at maximum speed?
A noise level up to 65 dB(A) may be normal at boost speed. Regular cleaning of filters and checking the duct connections can reduce unwanted noise.
How do I replace the LED lights?
Switch off the power, open the lighting cover, remove the faulty LED module and fit a replacement approved by CDA. Always check the manual for the exact procedure.
Can I use the hood without a grease filter?
No, never operate the hood without a grease filter. The filters protect the motor from grease build-up and reduce fire risk.
What is the maximum extraction rate?
The maximum airflow is approximately 650 m³/h in boost mode, suitable for kitchens up to 40 m² when correctly ducted.
Is installation difficult?
The hood includes a telescopic flue and wall fixings. We recommend installation by a qualified engineer, especially for ducting and electrical connection.
Where can I download the full manual?
You can download the complete CDA EKN90SS user manual for free from notice-facile.com using the official PDF link on this page.
User questions about EKN90SS CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual EKN90SS - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKN90SS by CDA.