ECN72BL - Range hood CDA - Free user manual and instructions
Find the device manual for free ECN72BL CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | CDA |
| Model | ECN72BL |
| Width | 70 cm / 27.6 inches |
| Depth | 50 cm / 19.7 inches |
| Height (min-max) | 60-110 cm / 23.6-43.3 inches |
| Weight | 12 kg / 26.5 lbs |
| Power Supply | 220-240 V ~ 50 Hz |
| Maximum Airflow | 650 m³/h |
| Noise Level (max) | 65 dB(A) |
| Number of Speeds | 3 + Boost |
| Lighting | LED, 2 x 3 W |
| Filter Type | Aluminum grease filter |
| Ducting | 150 mm diameter, recirculation possible with charcoal filter |
| Control Type | Electronic touch buttons |
| Energy Class | A |
| Annual Energy Consumption | 45 kWh/year |
| Grease Filter Cleaning | Dishwasher safe or hand wash monthly |
| Charcoal Filter Replacement | Every 3-6 months |
| Safety Features | Automatic shut-off, motor thermal protection |
| Mounting | Under cabinet or wall-mounted |
| Warranty | 2 years |
Frequently Asked Questions - ECN72BL CDA
What is the recommended installation height above the hob?
For gas hobs, install at least 65 cm above; for electric or induction, at least 55 cm. Refer to the installation manual for precise measurements.
How often should I clean the grease filters?
Grease filters should be cleaned every month under normal use. They are dishwasher safe (low temperature) or can be hand washed with mild detergent.
Can this hood be used in recirculation mode?
Yes, the CDA ECN72BL can be used in recirculation mode with a charcoal filter (not included). The ducting outlet can be capped for internal recirculation.
How do I replace the charcoal filter?
Remove the grease filters first. The charcoal filter is located behind them. Unlock and replace. It should be replaced every 3-6 months depending on usage.
What do I do if the hood is not extracting properly?
Check that the grease filters are clean and that the ducting is not blocked. Also ensure the charcoal filter (if used) is not saturated. Increase speed if necessary.
The LED lights are not working - can they be replaced?
The LED lights are integrated and should be replaced by a qualified technician. Contact CDA customer service for assistance.
What is the noise level at maximum speed?
The maximum noise level is approximately 65 dB(A), which is comparable to a normal conversation. Lower speeds are quieter.
Is the hood suitable for island installation?
The ECN72BL is designed for under cabinet or wall mounting. For island installation, an extension kit may be required. Check the manual for compatibility.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the timer button for 3 seconds until the indicator light turns off or resets.
What maintenance does the motor require?
The motor is sealed and requires no routine maintenance. Ensure proper ventilation and avoid grease buildup. If unusual noise occurs, contact a service technician.
User questions about ECN72BL CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ECN72BL - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ECN72BL by CDA.
USER MANUAL ECN72BL CDA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CDA
Model : ECN72BL
Category : Range hood