EKP90BL - Range hood CDA - Free user manual and instructions
Find the device manual for free EKP90BL CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in range hood |
| Brand | CDA |
| Model | EKP90BL |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min-max) | 60-110 cm |
| Net Weight | 15 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Rated Power | 200 W |
| Extraction Method | Ducted / Recirculating |
| Maximum Airflow | 700 m³/h |
| Noise Level (max) | 65 dB(A) |
| Number of Speeds | 3 + Intensive |
| Filter Type | Aluminum grease filter |
| Charcoal Filter (optional) | Yes, for recirculation |
| Lighting | 2 x 3 W LED |
| Controls | Electronic push buttons |
| Installation Type | Under cabinet |
| Energy Class | A+ |
| Annual Energy Consumption | 35 kWh/year |
| Grease Filter Efficiency | Class B |
| Fluid Dynamic Efficiency | Class A |
| Warranty | 2 years |
Frequently Asked Questions - EKP90BL CDA
How do I install the EKP90BL range hood?
Installation should be carried out by a qualified electrician. Ensure the hood is securely mounted under the cabinet at a height of 65-75 cm above the hob. Connect to a 220-240 V power supply. For ducted mode, connect the exhaust duct to an external vent. For recirculation mode, install the charcoal filter.
How do I clean the grease filters?
Remove the aluminum grease filters and wash them with warm soapy water or in a dishwasher at low temperature. Dry thoroughly before reinserting. Clean filters every 2-3 months depending on usage.
How often should I replace the charcoal filter?
The charcoal filter should be replaced every 3-6 months, or more frequently if the hood is used intensively. It is not washable; replace when the odor removal efficiency drops.
What should I do if the hood stops working?
Check the power supply: ensure the plug is connected and the circuit breaker is on. If still not working, clean the grease filters as clogged filters can cause the motor to overheat and shut off. If the issue persists, contact CDA customer service.
Can I use the hood without ducting?
Yes, the EKP90BL can be used in recirculation mode. You need to install a charcoal filter (sold separately) to absorb odors. The air is then recirculated back into the kitchen.
What is the maximum airflow and noise level?
The maximum airflow is 700 m³/h at the highest speed. The noise level at this speed is approximately 65 dB(A), which is comparable to normal conversation.
How do I change the LED lights?
The LED lights are integrated and should be replaced by a qualified technician. If a light fails, contact CDA service for a replacement. Do not attempt to open the light unit yourself.
What is the recommended height above the hob?
For optimal performance, install the hood 65-75 cm above an electric hob and 75-85 cm above a gas hob. This ensures efficient extraction while avoiding heat damage.
How do I activate the intensive speed?
Press the intensive speed button (often marked with a symbol) for a few seconds. The hood will run at maximum speed for 10 minutes and then automatically revert to the previous speed. This is useful for heavy smoke or steam.
Is the hood compatible with a recirculation kit?
Yes, the EKP90BL can be converted to recirculation mode using the optional carbon filter kit. Ensure the kit is correctly installed to maintain performance and safety.
User questions about EKP90BL CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual EKP90BL - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKP90BL by CDA.
USER MANUAL EKP90BL CDA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CDA
Model : EKP90BL
Category : Range hood