EZTK90BL - Range hood CDA - Free user manual and instructions
Find the device manual for free EZTK90BL CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | CDA |
| Model | EZTK90BL |
| Configuration | Wall-mounted chimney hood |
| Width | 90 cm |
| Height (min-max) | 500-940 mm adjustable chimney |
| Depth | 450 mm |
| Weight | 16 kg |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Power Consumption | 200 W |
| Max Extraction Rate | 650 m³/h |
| Number of Speeds | 3 |
| Noise Level | 54-68 dB depending on speed |
| Lighting | 2 x 1.5 W LED |
| Filter Type | Aluminium grease filter |
| Duct Diameter | 150 mm |
| Controls | Electronic push buttons |
| Modes | Extraction or recirculation (optional carbon filter) |
| Safety Features | Thermal overload protection |
| Maintenance | Removable, dishwasher-safe grease filters |
| Spare Parts | Grease filter and LED modules available |
Frequently Asked Questions - EZTK90BL CDA
How do I clean the grease filters?
Removing the aluminium grease filters is essential for performance. Remove them gently and wash in warm soapy water or a dishwasher on a low-temperature cycle. Dry thoroughly before reinstalling. For best results, clean the filters every month.
Can this range hood be used in recirculation mode?
Yes, the EZTK90BL can be used in recirculation mode with an optional carbon filter (included or sold separately depending on the model). The carbon filter helps remove odours when external ducting is not possible.
What duct diameter is required for extraction?
The ducting diameter should be 150 mm. A smaller diameter may reduce airflow and increase noise. Use rigid or flexible ducting made of non-combustible material for safety.
How do I replace the LED light?
To replace the LED module, first ensure the hood is disconnected from the power supply. Gently pry off the lighting unit cover, then unplug the LED module and replace it with a compatible type. Always use original spare parts from the manufacturer to avoid damage.
What is the maximum extraction rate?
The maximum extraction rate is 650 m³/h, which is ideal for kitchens up to about 25 square metres with standard ceiling height. This powerful flow efficiently removes smoke, steam, and odours while cooking.
Does the hood come with a charcoal filter?
No, the hood is supplied with aluminium grease filters only. If you need to use the recirculation mode, you must purchase a charcoal filter (often sold as an accessory). Check the user manual for the correct ref.
How do I operate the electronic push buttons?
The control panel features push buttons for selecting the fan speed (1-2-3), turning on the LED lights, and switching the hood off. Pressing the speed button repeatedly cycles through the settings. A light press is all it takes.
What is the recommended installation height?
For safety and optimal performance, install the hood at a height of 65-75 cm above an electric hob and 70-80 cm above a gas hob. This ensures efficient capture of fumes and reduces the risk of heat damage.
How often should I maintain the hood?
Clean the exterior with a soft damp cloth weekly. The grease filters should be washed every month or more often with heavy frying. If used in recirculation mode, replace the carbon filter every 3-6 months to maintain odour removal.
Does the hood have thermal overload protection?
Yes, the EZTK90BL is equipped with a thermal overload switch that automatically shuts off the motor if it overheats, preventing damage to the internal components. If this happens, switch off and allow the hood to cool down.
User questions about EZTK90BL CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual EZTK90BL - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EZTK90BL by CDA.