Bamba Ceramiccare 5in1 Pro - Hair Straightener CECOTEC - Free user manual and instructions

Product type	Multifunctional 5-in-1 straightener with rotating brushes
Brand	Cecotec
Model	Bamba Ceramiccare 5in1 Pro
Reference	03446
Power	1000 W
Power supply	220-240 V~, 50/60 Hz
Coating	Ceramic (CeramicCare)
Number of accessories	5
Included accessories	Straightening brush, round brushes 40 mm, 66 mm, 76 mm, 47 mm brush with retractable bristles
Rotation function	Automatic rotation of accessories to the left or right
Heating modes	3 modes: level 1, level 2, cold air
Overheating protection	Integrated protection system
Use	Household use only
Care and cleaning	Damp cloth, do not immerse in water
Warranty	2 years
After-sales service	Official Cecotec Service, phone [phone]
Design	Spain
Manufacturing	China

Frequently Asked Questions - Bamba Ceramiccare 5in1 Pro CECOTEC

Can this Cecotec Bamba Ceramiccare 5in1 Pro be used on wet hair?

It is designed to style and dry hair. It is recommended to dry excess water with a towel and brush the hair before use. Do not use it on hair dripping with water.

How to install and remove the hot air brush accessories?

Align the desired accessory with the slots on the device and turn it to the left until you hear a click. To remove it, press the release button and carefully pull the accessory.

What are the different power levels and what are they used for?

The power selector offers 3 positions: level 1 to set the hairstyle with a hot air flow, level 2 for quick drying and styling, and the cold air mode for gentle drying that prevents overheating.

How to create curls with the Cecotec Bamba Ceramiccare 5in1 Pro?

Brush your hair and separate it into sections. Use the small curl brush, place the section and turn the tip inward or outward depending on the desired direction. Hold for 7 to 10 seconds then release.

What to do if the device stops working during use?

First check that it is properly plugged in and that the outlet works. If the device turned off due to overheating, turn the selector to 0, unplug it and let it cool down. Make sure the air inlet is not blocked.

Can this device be used in a bathroom?

The device can be used in a bathroom only if it is unplugged after each use and if there is no risk of it getting wet. Never leave it near a water source.

How to clean and maintain the Bamba Ceramiccare 5in1 Pro?

Unplug the device and wait for it to cool down. Clean the surface with a damp cloth. Never immerse the device in water and do not use abrasive products.

What is the power and voltage of the device?

The power is 1000 W and the voltage is 220-240 V~ with a frequency of 50/60 Hz. Make sure your electrical installation is compatible.

Why does the device emit a burning smell during first use?

This is a normal phenomenon due to the initial heating of the internal components. This smell disappears after a few uses and does not indicate a defect in the device.

What is the warranty and how to contact after-sales service?

The product comes with a 2-year warranty from the date of purchase, upon presentation of the invoice. For any questions or incidents, contact the Official After-Sales Service of Cecotec at [phone].

USER MANUAL Bamba Ceramiccare 5in1 Pro CECOTEC

Safety instructions 5

1. Parts and components 22

2. Before use 22

3. Operation 22

4. Cleaning and maintenance 23

5. Technical specifications 23

6. Troubleshooting 24

7. Disposal of old electrical appliances 24

8. Technical support and warranty 24

SOMMAIRE

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the outlet is grounded.

This appliance is intended for domestic use only. It is not suitable for commercial or industrial use.

Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid, nor expose the electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec, in order to avoid any type of danger.

Ensure that the air inlets and outlets are not blocked. If they are blocked, the device will activate the overheat protection system.

Turn off and unplug the device from the power supply immediately after use. If used in a bathroom, make sure to unplug it always to avoid it from getting wet.

Unplug immediately the device from the socket in these cases: Abnormal operating.

Needs ti be cleaned.

After using it.

Do not use the device nearby water or other liquids.

Do not introduce metallic objects through the back grid or air inlets to avoid electric shocks.

Do not wind the cord around the device.

Do not allow the appliance to come into contact with your face, neck or scalp.

Do not leave the appliance on any surface while it is operating.

Do not use the device to comb wigs, natural hair extensions, artificial hair or animal hair.

The appliance is not intended to be used by children under the age of 8. It can be used by children over the age of 8, as long as they are given continuous supervision.

This appliance is not intended to be used by persons with reduced physical, sensory, or mental capabilities, or lack

of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance in a safe way by a person responsible for their safety, and understand the hazards involved.

Do not let children play with the device. Close supervision is necessary when the appliance is being used by or near children.

INSTRUCTIONS DE SÉCURITÉ

1. Power cord
2. Power selector
3. Rotation button
4. Releasing button
5. Interchangeable brush

Fig. 2

1. Comb for straightening hair
2. 40-mm round comb
3. 66-mm round comb
4. 76-mm round comb
5. 47-mm retractable bristles round brush

2. BEFORE USE

Take the product out of the box and remove all packaging material.

Make sure all parts and components are included and in good conditions. If any visible signs of damage are observed, contact Cecotec's Technical Support Service immediately.

3. OPERATION

Wash and condition your hair.

Dry it with a towel and comb it.

Assemble the accessory to be used to the upper part of the air brush. Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the outlet is grounded. Plug the device to a socket.

Warning: A slight odour and smoke might appear when heating the device for the first time.

This is completely normal and it will stop after using the device.

Install the accessory to be used with the slots aligned and turn the accessory to the left. You will hear a click when it is correctly into place. Select level 1 with the power selector to fix your hair with a strong and warm air flux. Select level 2 for a fast drying and combing, or the Cold drying for a soft drying, avoiding your hair from overheating.

After using the device, use hairpsray or foam on your hair.

To remove the accessory, press the releasing button and pull it out gently.

The device includes an automatic-rotation function.

Long press the rotating button so the accessory will rotate to the right or the left.

Unplug the device when it is not longer going to be used.

How to curl the hair

Comb your hair and form locks.

Take a hair lock and brush it with the brush for small locks. Once done, turn the tip inwards or outwards.

Keep this position from 7 to 10 seconds and remove it.

Repeat this step with the rest of your hair.

When finished, shape it using your fingers.

After using

Turn the device off and unplug it.

Place it on a heat-resistant surface until it cools down.

Remove the hair and dust from the device and accessories.

Clean the device with a soft cloth and store it in a dry place.

4. CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power outlet and allow the appliance to cool down.

Clean the upper part of the device with a soft damp cloth.

Do not immerse the whole unit into water or other liquids.

Do not use abrasive scouring pads, powders or cleaners to clean the product.

Do not twist, bend, strain, or damage the power cord in any way.

Clean the dirt and hairs that may be clogging the device.

5. TECHNICAL SPECIFICATIONS

Product reference: 03446

Product: CeramicCare 5in1 Pro Gyro

Power: 1000 W

Voltage: 220-240V\~, 50/60Hz

Made in China | Designed in Spain

6. TROUBLESHOOTING

Error	Possible causes
It does not work properly.	Check if the device is correctly plugged.Check if it has switched off due to an overheating.Turn the selector to 0, unplug the device and allow it to cool down.Before turning it back on, make sure there is not anything clogging the air inlet.

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimise the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly. f the product has a built-in battery or uses batteries, they should be removed from the appliance and disposed of appropriately.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

8. TECHNICAL SUPPORT AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.

The warranty will not cover the following situations:

The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.

The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec.

Faults deriving from the normal wear and tear of its parts, due to use.

The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at [phone].

1. PIÈCES ET COMPOSANTS

Img. 1