ST-100MB - Microphone ROLAND - Free user manual and instructions
Find the device manual for free ST-100MB ROLAND in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Roland |
| Model | ST-100MB |
| Product Type | Condenser Microphone |
| Category | Microphone |
| Frequency Response | 20 Hz - 20 kHz |
| Polar Pattern | Cardioid |
| Sensitivity | -40 dB ± 2 dB (0 dB = 1V/Pa) |
| Output Impedance | 200 Ω |
| Connector | 3-pin XLR |
| Power Requirement | 48V Phantom Power |
| Equivalent Noise Level | 16 dB SPL (A-weighted) |
| Maximum SPL | 130 dB SPL (1 kHz, 1% THD) |
| Dimensions | 48 mm diameter x 160 mm length |
| Weight | 250 g |
| Housing | Rugged metal body |
| Finish | Black non-reflective coating |
| Included Accessories | Microphone clip, carrying pouch |
| Maintenance | Wipe with a soft dry cloth; avoid solvents |
| Safety | Do not expose to rain or high humidity |
| Spare Parts & Repairability | Contact Roland authorized service center; replacement grille foam available |
| General Information | Suitable for instrument and vocal recording in studio or live settings |
Frequently Asked Questions - ST-100MB ROLAND
How do I connect the Roland ST-100MB microphone to my audio interface?
Connect the ST-100MB to your interface using a standard XLR cable. Make sure your audio interface provides 48V phantom power and enable it if needed.
Does the ST-100MB require phantom power?
Yes, this condenser microphone requires 48V phantom power for operation. Most mixers and audio interfaces can supply this via the XLR input.
What is the polar pattern of the ST-100MB?
The ST-100MB features a cardioid polar pattern, which picks up sound from the front and minimizes background noise from the sides and rear.
How should I clean the microphone?
Gently wipe the grille and body with a soft, dry cloth. Do not use liquid cleaners or solvents, and avoid getting moisture inside the capsule.
Can I use the ST-100MB for vocal recording?
Yes, while it is designed for instruments, its flat frequency response also works well for vocals when placed properly with the cardioid side facing the source.
What accessories come with the microphone?
The package includes a microphone clip and a carrying pouch for safe transport and mounting on a stand.
How can I reduce feedback when using this mic live?
Position the microphone close to the sound source, keep it behind the main speakers, and use a cardioid pattern to reject off-axis sound. You can also apply a high-pass filter at the mixer.
Is the ST-100MB compatible with wireless systems?
No, this microphone has a built-in XLR output and requires a cable. To go wireless, you would need an XLR transmitter compatible with the same frequency band.
What is the maximum sound pressure level the ST-100MB can handle?
It can handle up to 130 dB SPL without distortion, making it suitable for loud instruments like drums and guitar amplifiers.
What should I do if the microphone has no output?
First check the XLR cable and ensure phantom power is on. Then confirm the polar pattern is set correctly and the mixer channel is not muted. If still no signal, test with another cable or contact Roland support.
User questions about ST-100MB ROLAND
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual ST-100MB - ROLAND and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST-100MB by ROLAND.
USER MANUAL ST-100MB ROLAND
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROLAND
Model : ST-100MB
Category : Microphone