ADC220B - Switches HAGER - Free user manual and instructions
Find the device manual for free ADC220B HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Hager |
| Model | ADC220B |
| Category | Electrical switch |
| Number of Gangs | 1 gang |
| Switch Type | Rocker switch |
| Rated Voltage | 250 V AC |
| Rated Current | 10 A |
| Frequency | 50/60 Hz |
| Degree of Protection | IP20 |
| Mounting Type | Flush mounting |
| Termination | Screw terminals |
| Conductor Cross-Section | 2.5 mm² |
| Operating Temperature | -10 °C to +40 °C |
| Material | Polycarbonate (flame retardant) |
| Color | White |
| Standards | EN 60669-1 |
| Number of Modules | 1 module |
| Maintenance | Wipe with a soft dry cloth |
| Repairability | Spare parts available |
| General Information | Indoor use only |
Frequently Asked Questions - ADC220B HAGER
What is the rated voltage of the Hager ADC220B?
The Hager ADC220B is designed for a rated voltage of 250 V AC, with a frequency of 50/60 Hz.
Can the ADC220B be used with LED lighting?
Yes, the ADC220B can control LED lighting as long as the total load does not exceed the 10 A rated current. For low-power LEDs, ensure compatibility with the switch's minimum load if specified.
How do I install the Hager ADC220B?
Installation should be performed by a qualified electrician. Connect the phase wire to the common terminal and the switched phase to the other terminal. Mount the switch in a flush box and secure it with the provided screws.
Does the ADC220B have a neon indicator?
No, the Hager ADC220B does not have a neon indicator. It is a standard on/off switch.
What is the maximum load capacity?
The switch can handle up to 10 A at 250 V AC, which corresponds to 2500 W for resistive loads. For inductive loads, derating may be required.
Is the ADC220B compatible with smart home systems?
No, the ADC220B is a manual switch and does not include smart features. It cannot be directly connected to smart home hubs.
Can I use the switch in a bathroom?
The switch has an IP20 rating, meaning it is only suitable for indoor, dry locations. It should not be installed in zones 0, 1, or 2 of a bathroom. Use a suitable IP-rated cover if needed.
What is the degree of protection?
The degree of protection is IP20, which protects against solid objects larger than 12 mm but not against water. It is intended for use inside a building.
Does the switch require a neutral wire?
No, the Hager ADC220B is a single-pole switch and only requires live and switched-live wires. A neutral is not needed for basic operation.
What type of mounting is required?
The switch is designed for flush mounting in a standard wall box (UK square box or European round box) with a depth of at least 35 mm.
User questions about ADC220B HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switches in PDF format for free! Find your manual ADC220B - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADC220B by HAGER.
USER MANUAL ADC220B HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : ADC220B
Category : Switches