CDA684T - Switches HAGER - Free user manual and instructions
Find the device manual for free CDA684T HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hager |
| Model | CDA684T |
| Product Type | Switch |
| Mounting Type | Flush-mounted |
| Dimensions (L x W x D) | 75 mm x 75 mm x 30 mm (approx.) |
| Weight | Approx. 0.08 kg |
| Supply Voltage | 230 V AC |
| Rated Current | 10 A |
| Frequency | 50 Hz |
| Number of Poles | 1-pole |
| Main Functions | On/off control of lighting and resistive loads |
| Material | Flame-retardant polycarbonate |
| Protection Degree | IP20 |
| Operating Temperature | -5°C to +40°C |
| Connection Type | Screw terminals |
| Finish | White, glossy |
| Installation Notes | Flush-mounted in a standard recessed box |
| Maintenance & Cleaning | Wipe with a dry cloth; avoid solvents |
| Safety Precautions | Install by qualified electrician; disconnect power first |
| Spare Parts & Repairability | Replace the complete unit; no user-serviceable parts |
| Certifications & Standards | CE, EN 60669-1 |
Frequently Asked Questions - CDA684T HAGER
What is the rated voltage and current for the Hager CDA684T switch?
The switch is designed for 230 V AC with a maximum current of 10 A. Always verify your circuit load to ensure it does not exceed these ratings.
Can the CDA684T be used to control LED lighting?
Yes, the switch can control most LED lighting circuits, as it is a simple on/off switch. However, for very small loads (e.g. low-wattage LED drivers), ensure the total load is within the switch's rating and compatible with inrush currents.
How should I install the switch?
Installation should be performed by a qualified electrician. Disconnect the mains power, mount the switch in a standard flush box, and connect the phase and load wires to the terminals. Ensure all screws are tightened to 0.8 Nm.
What is the IP protection rating?
The CDA684T has a protection rating of IP20, meaning it is protected against finger contact but not against water. It is intended for indoor use only in dry locations.
Is the surface of the switch resistant to UV or weathering?
The switch is made from polycarbonate with a UV-resistant coating, making it suitable for indoor use. It is not recommended for installation outdoors unless placed in a weatherproof enclosure with a higher IP rating.
Does the switch have a built-in pilot light?
The Hager CDA684T is a standard single-pole switch without a pilot indicator. If you need visual status indication, consider a switch with an LED indicator or install a separately wired indicator.
Can I use the switch for a fan or a motor?
Yes, it can control a single-phase fan or motor up to 10 A. However, for motors with high starting current, use an appropriate contactor or verify the lock rotor current does not exceed the switch contact rating.
How do I clean the switch?
Use a clean, dry cloth to wipe the surface. Do not use liquid cleaners or solvents, as they may damage the plastic and decrease insulation resistance. Always switch off the mains before cleaning.
What is the recommended tightening torque for the terminals?
The recommended tightening torque is 0.8 Nm (7 lbf-in) for a secure connection. Overtightening may damage the threads.
Is the switch compliant with European standards?
Yes, it is CE marked and complies with EN 60669-1 for switches, as well as the relevant low-voltage and EMC directives. This ensures safe operation in residential and commercial installations.
User questions about CDA684T HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switches in PDF format for free! Find your manual CDA684T - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CDA684T by HAGER.
USER MANUAL CDA684T HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : CDA684T
Category : Switches