ADD906T - Switches HAGER - Free user manual and instructions
Find the device manual for free ADD906T HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Hager |
| Model | ADD906T |
| Range | ADD906 |
| Mounting Type | Flush-mounted |
| Material | Polycarbonate, self-extinguishing |
| Colour | White |
| Dimensions (H x W x D) | 71 x 71 x 41 mm |
| Weight | 90 g |
| Rated Voltage | 230 V AC |
| Rated Current | 10 A |
| Frequency | 50/60 Hz |
| Switch Function | SPST (Single-Pole, Single-Throw) |
| Lighting Compatibility | Incandescent, halogen and LED (non-dimming) |
| Protection Rating | IP20 |
| Operating Temperature | -5°C to +40°C |
| Terminal Type | Screw terminals |
| Conductor Cross-Section | Up to 2.5 mm² |
| Maintenance | Clean with a soft, dry cloth |
| Safety Standards | Complies with EN 60669-1 |
| Spare Parts | Rocker, frame and screws available separately |
Frequently Asked Questions - ADD906T HAGER
What is the Hager ADD906T?
The Hager ADD906T is a single-pole switch used for controlling lighting circuits. It features a rocker mechanism and is designed for flush mounting in standard wall boxes.
How do I install the ADD906T?
Turn off the power supply first. Connect the live wire to one terminal and the switched live to the other, then secure the screw terminals. Mount the switch into the wall box using the provided screws, and attach the rocker and frame.
Can the ADD906T be used with LED bulbs?
Yes, the switch is compatible with LED lighting, provided the total load does not exceed the rated current. It is suitable for resistive and inductive loads within the specified limits.
What is the maximum current rating?
The maximum current rating is 10 A at 230 V AC. This corresponds to a maximum switched power of approximately 2300 W for resistive loads.
Can I use the ADD906T for two-way switching?
Yes, the ADD906T can be used in a two-way switching configuration, requiring a second switch of the same type or a compatible two-way switch. Follow the wiring diagram in the manual.
Is the ADD906T suitable for outdoor use?
No, the switch has an IP20 rating, meaning it is protected against solid objects larger than 12 mm but not against water. It is intended for indoor installation only.
How do I clean the switch?
Use a soft, dry cloth to wipe the surfaces. Do not use abrasive cleaners or solvents, as they may damage the polycarbonate finish.
What should I do if the rocker is damaged?
The rocker is a spare part and can be replaced without removing the entire switch. Purchase a compatible replacement from Hager and snap it onto the mechanism.
Does the ADD906T have a warranty?
Hager provides a standard 2-year warranty against manufacturing defects. Retain the purchase receipt and contact your retailer for warranty claims.
What is the difference between the ADD906 and ADD906T?
The ADD906 is the standard switch, while the ADD906T may include additional features such as a time-delay function or integrated indicator light. Verify the specifications for your specific model.
User questions about ADD906T HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switches in PDF format for free! Find your manual ADD906T - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADD906T by HAGER.
USER MANUAL ADD906T HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : ADD906T
Category : Switches