JK06TK - Switches HAGER - Free user manual and instructions
Find the device manual for free JK06TK HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall switch |
| Brand | Hager |
| Model | JK06TK |
| Color | Alpine White |
| Material | Polycarbonate, Durable |
| Rated Voltage | 250 V AC |
| Rated Current | 10 A |
| Number of Gangs | 1 |
| Mounting Type | Flush (recessed) |
| Dimensions (H×W×D) | 80 × 80 × 41 mm |
| Weight | 80 g |
| Protection Rating | IP20 |
| Terminal Capacity | 1.5 to 2.5 mm² |
| Electrical Endurance | 20,000 cycles |
| Operating Temperature | -10 to +40 °C |
| Certifications | CE, EN 60669 |
| Main Function | ON/OFF control of lighting circuits |
| Cleaning | Wipe with a soft dry cloth |
| Maintenance | Maintenance-free |
| Safety Features | Reinforced terminals, impact-resistant surface |
| Spare Parts | Available through Hager service network |
| Repairability | Modular design, replaceable internal unit |
Frequently Asked Questions - JK06TK HAGER
What is the maximum load for the Hager JK06TK switch?
The Hager JK06TK is rated at 10 A and 250 V AC, which allows switching loads up to 2500 W for incandescent lamps. For LED or capacitive loads, the inrush current can be higher, so a safety margin is recommended.
Can I use the JK06TK switch with LED lighting?
Yes, the JK06TK works with most residential LED circuits. However, LED drivers can produce high inrush currents. Check the total number of LED lamps and ensure it does not exceed the capacitive load rating of the switch.
How do I wire the Hager JK06TK switch?
First, turn off the circuit breaker. Connect the live wire to the terminal labeled 'L' and the switched live to the terminal labeled '1'. Use a screwdriver to tighten the screws securely. A grounding wire is not required for a standard ungrounded switch.
Is the JK06TK a one-way or two-way switch?
The JK06TK is a single-pole, ON/OFF switch, designed to control a lighting point from one location. For a two-way setup (e.g., top and bottom of stairs), you need to combine it with a two-way switch module or a designated model.
Can the JK06TK switch be used with fans or motors?
No, this switch is intended for resistive loads such as incandescent lights and standard dimmable loads. Motors, pumps, or fans can cause heavy inductive currents that could damage the switch or create a fire hazard.
What is the IP rating of the Hager JK06TK?
The switch has an IP20 rating, meaning it is protected against solid objects larger than 12 mm, but not resistant to water. It should be installed indoors away from moisture or direct splashing.
How should I clean my Hager switch?
Use a soft dry cloth to wipe the surface. Do not use any abrasive cleaners, solvents, or spray liquids directly on the switch, as they may discolour or damage the material.
Does the JK06TK switch come with a warranty?
Hager provides a 5-year warranty for residential switches under normal use and when installed by a qualified electrician. Keep the purchase receipt for warranty claims.
Is the JK06TK compatible with Hager frames and plates?
Yes, the JK06TK is part of the Hager modular system. It fits into standard Hager frames (80×80 mm), which are available in multiple colours and materials to match your interior.
What tools do I need for the installation?
You will need a flat-head screwdriver for the terminal screws, a wire stripper to prepare the cables, and a voltage tester to confirm the circuit is off. No specialized tools are required.
User questions about JK06TK HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switches in PDF format for free! Find your manual JK06TK - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JK06TK by HAGER.
USER MANUAL JK06TK HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : JK06TK
Category : Switches