PowerConnect J-SRX100 - Network switch DELL - Free user manual and instructions
Find the device manual for free PowerConnect J-SRX100 DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Dell |
| Model | PowerConnect J-SRX100 |
| Product Type | Network switch with integrated security services |
| Ports | 8 x 10/100/1000 Ethernet ports |
| Dimensions (W x D x H) | 14.5 x 8.5 x 1.5 inches (36.8 x 21.6 x 3.8 cm) |
| Weight | 3.5 lbs (1.6 kg) |
| Power Supply | AC 100-240V, 50-60Hz, 12V DC output |
| Firewall Performance | Up to 1.5 Gbps |
| VPN Performance | Up to 200 Mbps |
| Concurrent Sessions | 64,000 |
| Management | Web-based UI, CLI, SNMP |
| Mounting | Desktop or wall-mountable |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Operating Humidity | 10% to 90% non-condensing |
| Security Features | Stateful firewall, IPSec VPN, IDP, anti-spam, antivirus |
| Repairability | Modular fan and power supply; user-replaceable parts |
| Cleaning Instructions | Wipe with dry cloth; avoid cleaning agents |
Frequently Asked Questions - PowerConnect J-SRX100 DELL
How do I reset the Dell PowerConnect J-SRX100 to factory defaults?
Press and hold the Reset button on the back panel for 10 seconds until the Status LED blinks. This restores the factory configuration and default credentials.
How to access the web management interface?
Connect to the device using an Ethernet cable. Set your PC to a static IP in the same subnet as the default IP (192.168.1.1). Open a browser and enter https://192.168.1.1. The default username is admin and password is admin.
Can the J-SRX100 be used as a simple unmanaged switch?
By default, it functions as a secure router with switch capabilities. To use it as a basic switch, configure all ports in the same zone and bridging mode, disabling security policies.
How to update the firmware?
Download the latest firmware from Dell's support website. Log into the web interface, go to Maintenance > Software Update, upload the file, and confirm. The device will reboot automatically.
How to create a VLAN?
Navigate to Networking > Interfaces, select an interface, enable VLAN tagging, set the VLAN ID, and assign membership to ports.
How to configure a VPN connection?
Configure a IPSec VPN by going to VPN > IPSec, create a tunnel with peer IP, pre-shared key, and encryption settings. Then apply security policies to allow traffic.
Why is the Power LED not on?
Check the power adapter and outlet. Ensure the device is receiving 12V DC power. If the LED remains off, the power supply may be faulty.
How to replace the fan?
The fan is modular. Remove the screw on the front bezel, slide the fan module out, and replace it with a compatible DC 12V fan. No need to open the chassis.
How to perform a quick connectivity test?
Use the Ping tool from the web interface or CLI. Go to Maintenance > Ping, enter the target IP, and view results.
How to clean the device?
Use a dry soft cloth to wipe the exterior. Avoid using liquid cleaners or sprays. Ensure the device is unplugged during cleaning.
User questions about PowerConnect J-SRX100 DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual PowerConnect J-SRX100 - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerConnect J-SRX100 by DELL.
USER MANUAL PowerConnect J-SRX100 DELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DELL
Model : PowerConnect J-SRX100
Category : Network switch