OPI4060BC - Range hood Concept - Free user manual and instructions
Find the device manual for free OPI4060BC Concept in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Concept |
| Model | OPI4060BC |
| Product type | Wall-mounted range hood |
| Mounting type | Wall-mounted |
| Width | 60 cm |
| Dimensions | 60 cm x 50 cm x 90 cm (W x D x H) |
| Duct diameter | 120 mm |
| Number of speeds | 3 |
| Control type | Push-button |
| Lighting | LED, 2 x 1.5 W |
| Extraction rate | 350 m³/h |
| Noise level | 65 dB (max speed) |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Power consumption | 220 W |
| Filter type | Aluminium grease filter |
| Charcoal filter | Optional for recirculation mode |
| Maintenance | Removable, washable grease filters |
| Cleaning | Filter off and hand wash in warm soapy water |
| Installation height | Minimum 65 cm above electric hobs, 75 cm above gas hobs |
| Spare parts | Grease filters, LED modules and control switches available |
| Warranty | 2 years |
Frequently Asked Questions - OPI4060BC Concept
How do I clean the grease filters?
Remove the aluminium filters from the range hood and hand wash them with warm soapy water. You can also use a soft brush. Wait until they are completely dry before reinstalling them. Regular cleaning of the grease filters maintains extraction performance.
How far above the hob should I install the hood?
The recommended installation height is at least 65 cm above an electric hob and 75 cm above a gas hob. This reduces the risk of heat damage and ensures good capture of cooking fumes.
Does this range hood work in recirculation mode?
Yes, it can be used in recirculation mode if you fit an optional charcoal filter. This filter is required when you cannot connect the hood to an outside duct.
How do I change the LED light?
Switch off the hood and wait until the lights are cool. Gently pull or twist the LED module out of its holder, depending on the fitting, and insert a replacement module of the same type and rating. Always use authorized spare parts.
Why is the hood noisy at high speed?
The noise level increases with air flow. A blocked grease filter or a partially blocked duct can make the motor work harder and create extra noise. Check the air duct and clean the aluminium filters regularly.
How often should I replace the charcoal filter?
If you use recirculation mode, the charcoal filter should be changed every 3 to 6 months, or when you notice a persistent smell. Unlike grease filters, the charcoal filter cannot be washed and reused.
What duct diameter do I need?
The duct connection diameter is 120 mm. For the best extraction, connect the hood to a duct of the same diameter and avoid sharp bends. The air duct should be as short as possible.
Can I use a longer duct than recommended?
It is possible, but a longer duct reduces extraction efficiency and increases noise. Use a rigid, smooth duct and minimise the number of bends to keep the extraction rate at a good level.
Why does the hood not start when I press the button?
Check that the grease filter is correctly locked in place, as many range hoods will not run without the filter inserted. Also verify that the power plug is connected and the push-button assembly is not damaged. Replace a worn switch with a genuine spare part if necessary.
What should I do if the buttons stop working?
Switch off the power and check the wiring connections to the control board. If the push-button contacts are worn, replace the switch with a genuine spare part. For any electrical repair, call a qualified technician.
User questions about OPI4060BC Concept
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual OPI4060BC - Concept and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OPI4060BC by Concept.