OPP1260BC - Range hood Concept - Free user manual and instructions
Find the device manual for free OPP1260BC Concept in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Concept |
| Model | OPP1260BC |
| Dimensions (W x D x H) | 600 mm x 500 mm x 150 mm |
| Weight | 12 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Fan Speeds | 3 |
| Noise Level (max) | 55 dB |
| Extraction Capacity | 600 m³/h |
| Installation Type | Wall-mounted |
| Lighting | LED, 2 x 2 W |
| Filter Type | Aluminum grease filter (optional charcoal filter) |
| Control Type | Electronic push buttons |
| Duct Diameter | 150 mm |
| Energy Class | B |
| Grease Filter Cleaning | Every 3 months (in dishwasher or hand wash) |
| Charcoal Filter Replacement | Every 6 months |
| Safety Features | Overheat protection, auto shut-off |
| Spare Parts Availability | Available from manufacturer |
| Reparability | Repairable by qualified technician |
Frequently Asked Questions - OPP1260BC Concept
How do I install the Concept OPP1260BC range hood?
Installation must be done by a qualified professional. Ensure the hood is mounted at least 65 cm above an electric hob or 75 cm above a gas hob. Fix the hood securely to the wall using the provided template and screws. Connect to the power supply and ducting if using external exhaust.
How often should I clean the grease filters?
Clean the aluminum grease filters every 3 months. They can be washed in a dishwasher (low temperature) or by hand with warm soapy water. Ensure they are completely dry before reinstalling.
Can I use the hood without ducting (recirculation mode)?
Yes, the hood supports recirculation mode. You need to install an optional charcoal filter (not included) to absorb odors. The charcoal filter should be replaced every 6 months.
What does the control panel do?
The electronic push buttons control the fan speeds (3 levels) and lighting. Press the speed buttons to adjust extraction power. The light button toggles the LED lights on/off.
Why is my range hood noisy?
Noise can be caused by loose parts or blocked ductwork. Check that the hood is securely mounted. Ensure the grease filters are clean and properly installed. If the duct is obstructed, clear it. Maximum noise level is 55 dB at highest speed.
How do I replace the LED lights?
The LED lights are integrated modules. To replace them, turn off the power, open the underside panel, disconnect the light connector, and snap in a compatible LED module (available as spare part). If unsure, contact a technician.
What should I do if the hood stops working?
Check the power supply and circuit breaker. If the motor overheats, the thermal switch may have tripped; wait 30 minutes for it to cool and reset. For persistent issues, contact customer support.
How do I change the fan speed?
Press one of the three fan speed buttons on the control panel. Speed 1 is for low extraction (quiet operation), speed 3 for maximum extraction (high noise). The current speed is indicated by a light.
Can I use a longer duct than provided?
Yes, but ensure the duct diameter is 150 mm and the length is kept as short as possible with minimal bends to maintain performance. Longer ducts reduce extraction efficiency.
Where can I find spare parts for my OPP1260BC?
Spare parts such as filters, LED modules, and control boards are available through Concept's official service centers or authorized dealers. Use the model number OPP1260BC when ordering.
User questions about OPP1260BC Concept
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual OPP1260BC - Concept and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OPP1260BC by Concept.