OPV3560BC - Range hood Concept - Free user manual and instructions
Find the device manual for free OPV3560BC Concept in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | Concept |
| Model | OPV3560BC |
| Recommended Room Size | Up to 15 m² |
| Maximum Airflow | 450 m³/h |
| Noise Level | 65 dB (max. speed) |
| Number of Speeds | 3 |
| Control Panel | Electronic push buttons |
| Lighting | LED lamp (2 x 1.5 W) |
| Filter Type | Aluminium grease filter |
| Number of Filters | 2 |
| Duct Diameter | 150 mm |
| Mounting | Wall installation |
| Exhaust Type | Ducted / recirculating (with charcoal filter) |
| Dimensions (W x D x H) | 600 x 500 x 330 mm |
| Weight | 10 kg (approx.) |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Safety Features | Overheat protection, CE certified |
| Maintenance | Wash grease filter monthly |
Frequently Asked Questions - OPV3560BC Concept
How do I clean the grease filter of my Concept range hood?
Remove the filter from the hood and wash it with warm soapy water or in the dishwasher. Ensure it is completely dry before reinstalling. Clean it every 3 months for optimal performance.
How often should I replace the charcoal filter for recirculation mode?
In recirculation mode, replace the charcoal filter every 3 to 6 months depending on usage. A saturated filter reduces extraction power and causes odours.
What is the maximum air extraction capacity of the OPV3560BC?
The maximum airflow is 450 m³/h, suitable for kitchens up to approximately 15 m².
How do I switch between ducted and recirculating installation?
For ducted mode, connect the outlet to a ventilation duct. For recirculating mode, install a charcoal filter on each motor inlet and ensure the air is vented back into the room through the top grille.
Why is my range hood noisy during operation?
Check if the grease filter is clogged or the duct is blocked. Ensure the hood is mounted securely. Noise levels reach 65 dB at maximum speed.
How do I replace the LED lamp in the range hood?
Turn off power, remove the bulb cover, disconnect the LED connector, and replace with a new LED module of the same type. Contact technical support for spare parts.
Can I control this range hood with a remote control?
No, this model is controlled via electronic push buttons on the front panel. There is no remote control function.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the speed button for 3 seconds until the indicator turns off. Refer to the manual for the exact sequence.
What should I do if the hood does not start?
Check the power connection, the plug and the fuse. If the problem persists, contact a qualified technician. Do not attempt to repair the motor yourself.
What duct diameter is recommended for installation?
Use a duct with a diameter of 150 mm. Keep it as short and straight as possible to maximise airflow and reduce noise.
User questions about OPV3560BC Concept
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual OPV3560BC - Concept and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OPV3560BC by Concept.
USER MANUAL OPV3560BC Concept
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Concept
Model : OPV3560BC
Category : Range hood