C383XC - Loudspeaker Revel - Free user manual and instructions
Find the device manual for free C383XC Revel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-ceiling loudspeaker |
| Brand | Revel |
| Model | C383XC |
| Speaker Configuration | 3-way |
| Woofer Size | 8 inches (203 mm) |
| Tweeter Type | 1-inch aluminum dome |
| Frequency Response | 45 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 90 dB (2.83V/1m) |
| Power Handling (RMS) | 150 watts |
| Recommended Amplifier Power | 25 to 150 watts per channel |
| Mounting Cutout Diameter | 272 mm |
| Mounting Depth | 170 mm |
| Weight | 5.6 kg |
| Grille Finish | White, paintable to match ceiling |
| Installation Method | In-ceiling with dog-ear clamps |
| Swivel Tweeter | Yes, for directional sound adjustment |
| Connector Type | Gold-plated binding posts |
| Special Features | Aluminum cone woofer, waveguide tweeter |
| Low-Frequency Alignment | Ported enclosure for extended bass |
| Environmental Rating | Indoor installation |
| Maintenance | Light dusting; no liquid cleaners |
| Repair and Parts | Contact Revel authorized service for replacement |
Frequently Asked Questions - C383XC Revel
What is the recommended amplifier power for the Revel C383XC?
The C383XC has a power handling of 150 watts RMS. A recommended amplifier range is 25 to 150 watts per channel to achieve optimal performance without distortion.
Can the C383XC be used in a home theater setup?
Yes, the C383XC is excellent for home theater use, especially as main or surround speakers. Its 3-way design provides clear dialogue and immersive sound effects.
How do I install the C383XC in my ceiling?
Installation requires cutting a hole of 272 mm diameter, inserting the speaker, and tightening the dog-ear clamps from the front. Ensure appropriate clearance above the ceiling for depth.
How do I adjust the tweeter direction?
The C383XC features a swivel tweeter that can be tilted up to 15 degrees. Loosen the surrounding trim slightly, adjust the tweeter angle, and re-tighten.
What is the ideal placement for the C383XC?
For balanced sound, place speakers 2.5 to 3 meters apart from each other and at least 30 cm from walls. To avoid reflections, aim the speakers toward the listening area.
How do I clean the speakers?
Use a soft dry microfiber cloth to gently dust the grille and frame. Avoid water, solvents, and abrasive cleaners, as they may damage the finish.
Is the C383XC suitable for high-moisture areas like bathrooms?
The C383XC is not rated for high-moisture environments. Use only in dry indoor spaces. For bathrooms, consider models with specific weatherproofing.
What type of wire should I use?
Use 16 to 14 gauge speaker wire for runs up to 15 meters. For longer runs, use 12 gauge to minimize resistance and power loss.
Do I need to break in the speakers?
While not mandatory, a break-in period of 20-30 hours at moderate volume allows the moving parts to flex, improving bass response and overall smoothness.
How do I paint the grille to match my ceiling?
Remove the grille and use spray paint formulated for plastic or metal. Apply thin coats while keeping the grille pattern visible. Wait for it to dry completely before reattaching.
User questions about C383XC Revel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual C383XC - Revel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C383XC by Revel.
USER MANUAL C383XC Revel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Revel
Model : C383XC
Category : Loudspeaker