W263 - Loudspeaker Revel - Free user manual and instructions
Find the device manual for free W263 Revel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-wall loudspeaker |
| Brand | Revel |
| Model | W263 |
| Speaker Type | 2-way in-wall speaker |
| Tweeter | 1-inch aluminum dome tweeter |
| Woofer | 6.5-inch (165 mm) woofer |
| Frequency Response | 55 Hz - 20 kHz |
| Sensitivity | 89 dB (2.83 V/1 m) |
| Nominal Impedance | 8 ohms |
| Power Handling | 10 W - 80 W RMS |
| Power Source | Passive - direct speaker cable |
| Dimensions (H x W x D) | 11.4 x 7.5 x 3.9 in |
| Weight | 5.1 lb (2.3 kg) |
| Installation | In-wall with clamp system |
| Grille | Paintable, magnetically attached |
| Terminal | Gold-plated push terminals |
| Recommended Amplifier | 10-80 W per channel |
| Recommended Placement | Ear level, 6-8 ft apart |
| Usage | Stereo and home theater |
| Maintenance | Wipe with soft dry cloth only |
| Safety | Turn off amplifier before wiring |
| Spare Parts | Replacement drivers available from service center |
| Repairability | Authorized dealer service recommended |
Frequently Asked Questions - W263 Revel
How do I install the Revel W263 loudspeaker?
Use the included cutout template to trace the opening, cut the drywall, feed the speaker wire, connect it to the gold-plated terminals, insert the speaker, and tighten the mounting clamps.
What amplifier power is recommended for the W263?
Revel recommends 10 to 80 watts per channel into 8 ohms. Choose an amplifier with enough clean power for your listening level and room size.
Can I paint the grille of the W263?
Yes, the grille is paintable. Remove it, apply thin coats of paint, avoid clogging the perforations, and let it dry completely before reinstalling.
Does the W263 require an enclosure or backbox?
It is designed for in-wall infinite baffle mounting. An optional pre-construction bracket can be used to improve isolation and sound consistency.
What is the best placement for stereo imaging?
Position the speakers at ear level, about 6 to 8 feet apart, and toe them toward the listening area. Avoid obstructions such as heavy drapes.
How should I clean and maintain the W263?
Remove the grille and gently wipe the drivers with a soft dry cloth. Do not use water, solvents, or a vacuum on the tweeter or woofer.
Why is there no sound from one W263 speaker?
Check the receiver output, speaker cables, and speaker selector. Swap the left and right channels to determine if the problem is in the speaker or the electronics.
Can I use the W263 for home theater?
Yes, it works well as a front, center, or surround channel. Pair it with a subwoofer for a complete home theater system.
Is the W263 suitable for outdoor or humid areas?
No, the W263 is not waterproof. Install it only in dry, indoor locations such as living rooms, theaters, or bedrooms.
What if a driver on the W263 is damaged?
Contact a Revel dealer or authorized service center for replacement drivers and professional repair. Do not attempt to fix the driver yourself.
User questions about W263 Revel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual W263 - Revel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. W263 by Revel.
USER MANUAL W263 Revel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Revel
Model : W263
Category : Loudspeaker